Does anyone make a battery monitor that will ALSO allow one to reset the system? As in, switch all power off then back on, reboot the entire AP? Just looking to not add another board. Would be sweet.
Steve- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of D. Ryan Spott Sent: Wednesday, October 27, 2010 2:51 AM To: WISPA General List Subject: Re: [WISPA] Monitoring batteries I use a superRMS 2 from these guys: http://www.remotemonitoringsystems.ca/ The software they put on these things is just a little more polished than the packetflux stuff. I use both and love the cost of the packetflux equipment. Http://www.irongoat.net/sites/mtsultan is a private link that let's some of my partners see what is going on with the site. The wiring diagrams might be of use to you. ryan On Oct 26, 2010, at 3:42 PM, "~NGL~" <n...@ngl.net> wrote: What is available to monitor a solar site via the net. We have 2 remote tower powered by solar and would like to monitor them via the web. Thanx NGL <flag.gif> If you can read this Thank A Teacher. And if it's in English Thank A Soldier! -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/