Even at the same tx power the XR2 has a better receive sensitivity - that's what I like about it. Picks up the laptops talking better.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Nov 9, 2010 at 4:16 PM, Jim Patient <[email protected]> wrote: > 65mW on the r52 and 600mW on the XR2. Just depends on how much power you > need. The 433ah board gives you 3 ethernet ports and has enough horsepower > for what you need. We have them in stock and can build it and even > configure it for you if needed. > > Hit me off-list if you would like some help with it. > > If you want to order over the web just use discount code wispa. > > Jim Patient > > Cell: 314-565-6863 > Desk: 636-692-4200 > YIM: jeffcosohowww.wlan1.comwww.linktechs.netwww.wifimidwest.com > > > On 11/9/2010 3:11 PM, Matt Jenkins wrote: > > Why the extra for an XR2 vs 1/3 the cost for a R52? > > On 11/09/2010 12:54 PM, Josh Luthman wrote: > > It looks to me like the rb411ahr (or whatever has the radio built in) would > work. If you need a better radio get an rb411a + xr2. You only get ONE > ethernet port - ever! > > I would probably go with the rb493ah and xr2 - too many ports is better > then not enough. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Nov 9, 2010 at 3:49 PM, Matt Jenkins <[email protected]>wrote: > >> I will need to do 1 simple queue per customer for throughput control. >> Total traffic would be about 5-7 mbps. Need a single 802.11b/g wireless >> with internal antenna. All of the customers will be laptops or ruckus >> indoor wireless units. Only 1 customer will be plugged in to a port. I >> would like to get a complete box that my guys don't have to build. Pull >> out of packaging and load prebuilt config. >> >> Thanks >> >> On 11/09/2010 12:40 PM, Kristian Hoffmann wrote: >> > RB493 with an R52Hn? That way you have 8 ports for wired customers as >> > well. If you want elaborate QoS with queue trees and such, an RB493AH >> > might be worth the few extra dollars. >> > >> > Sneaky one-liner to block inter-client traffic... >> > >> > /ip firewall filter add chain=forward \ >> > in-interface=!ether1 out-interface=!ether1 action=drop >> > >> > >> > -Kristian >> > >> > On Tue, 2010-11-09 at 12:29 -0800, Matt Jenkins wrote: >> > >> >> What mikrotik would be best for doing what is shown in the picture? >> >> >> >> Thanks >> >> >> >> >> -------------------------------------------------------------------------------- >> >> WISPA Wants You! Join today! >> >> http://signup.wispa.org/ >> >> >> -------------------------------------------------------------------------------- >> >> >> >> WISPA Wireless List: [email protected] >> >> >> >> Subscribe/Unsubscribe: >> >> http://lists.wispa.org/mailman/listinfo/wireless >> >> >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> > >> > >> > >> -------------------------------------------------------------------------------- >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> -------------------------------------------------------------------------------- >> > >> > WISPA Wireless List: [email protected] >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today!http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today!http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
