Do it before hand to make sure the cable works or just replace the one that's up there.
---------- Original Message ---------------------------------- From: Faisal Imtiaz <[email protected]> Reply-To: [email protected], WISPA General List <[email protected]> Date: Fri, 12 Nov 2010 17:51:16 -0500 >Look up ... EZ RJ45 Crimp system made by Platinum tools... > >Regards. > >Faisal Imtiaz >Snappy Internet & Telecom > >On 11/12/2010 5:41 PM, support wrote: >> is there a more simple way to crimp Shielded Rj45 on shielded Cat5 cable >> >> getting the jacket to fit in the Rj-45 end is vary hard 100ft in the air >> on a tower >> >> anyone have tips or tricks or know of better fitting ends? >> >> Thanks >> > > > >-------------------------------------------------------------------------------- >WISPA Wants You! Join today! >http://signup.wispa.org/ >-------------------------------------------------------------------------------- > >WISPA Wireless List: [email protected] > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ > ________________________________________________________________ Sent via the WebMail system at avolve.net -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
