My Tranzeo CPE didnt like "M" radios. I've switched out most of my CPE to UBNT but where I didnt, I used regular Bullet's and Pico's as the Tranzeos work fine with those until I can get them swapped out with "M" radios.
On Sat, Jan 29, 2011 at 9:07 AM, Phil Curnutt <pcurn...@gmail.com> wrote: > We are making the switch from Tranzeo AP's and CPE's to Ubnt and have run > into a problem. Seems that the Tranzeo CPE's don't play well with the Ubnt > AP's. They will only bind when both are set to 20 Mhz and the Tranzeo CPE's > lose there connection after a period of time and need to be power cycled to > rebind to the Ubnt AP's. Anybody else having these problems and are there > any work arounds? I have tried several different configurations and updated > all to newest firmware, but no joy. > > Phil > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- -RickG
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/