If you have a blanket que at each tower you can do a torch and see what Ips are using the most bandwidth. Otherwise, a que for each customer gives you a traffic graph on the mikrotik graphs page (if you have that enabled). That's the easy way to do it.
Justin -- Justin Wilson <[email protected]> Aol & Yahoo IM: j2sw http://www.mtin.net/blog xISP News http://www.twitter.com/j2sw Follow me on Twitter Wisp Consulting Tower Climbing Network Support From: Scott Piehn <[email protected]> Reply-To: WISPA General List <[email protected]> Date: Mon, 21 Feb 2011 16:21:25 -0600 To: WISPA General List <[email protected]> Subject: [WISPA] MT Q's at Edge We currently Q each customer at the tower. I am looking at my edge router trying to figure out who is using what Should I just create an unlimited simple Q for each IP or is there a more efficient way. I want to still do the actual traffic limiting at the tower thanks in advance --------------------------------------------- Scott Piehn ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
