Yes, 40Mhz is the maximum width allowed for a 11Ghz channel and license. However, you can buy two licenses and bond two channels, using two radios..
Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: Scott Carullo To: WISPA General List Sent: Saturday, May 14, 2011 12:27 PM Subject: Re: [WISPA] [WISPAOLD] Licensed 11ghz Hops Below is part of a conversation from last November. Josh mentions the SAF Lumina using 50Mhz channels for 325Mb FDX. For FCC in the US 40Mhz channel is the largest that can be used right? Just want to verify my understanding and make sure there isn't a way to do this in the US.... Thanks Scott Carullo Technical Operations 855-FLSPEED x102 ------------------------------------------------------------------------------ From: "Brad Belton" <b...@belwave.com> Sent: Friday, November 05, 2010 3:10 PM To: "WISPA General List" <wireless@wispa.org> Subject: Re: [WISPA] Licensed 11ghz Hops You coordinate two paths. We have a Trango GigaLINK 6GHz link using two radio pairs and a combiner plate attaching to one antenna on each end. One radio set is V the other is H. Gives us twice the capacity (165MB x 2) plus failover in the event one ODU or IDU fails plus Frequency diversity for higher overall availability. Best, Brad From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Friday, November 05, 2010 2:07 PM To: WISPA General List Subject: Re: [WISPA] Licensed 11ghz Hops Not sure where dual polarities come in to play with licensed gear. I know that your PCN strictly states V or H. The SAF CFIP Lumina uses 50Mhz one way and 50Mhz the other way to get full duplex. Each channel with 256qam does 325mbps. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 5, 2010 at 2:59 PM, Matt <lm7...@gmail.com> wrote: How long has Exalt been doing licensed gear? Is it pretty good gear? Does SAF allow you to use a dual polarity dish in 11ghz and bond both polarities for additional bandwidth? Can both polarities be done on the same channel? -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ------------------------------------------------------------------------------ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/