Is it gone from any spectrum analyzers or did you check anything like that? On May 20, 2011 2:37 PM, "Jerry Richardson" <[email protected]> wrote: > I can't get to it today. I realized it has no users and will get pulled eventually. > > -30dB and switching to station seems to have done the trick. > > - Jerry > > From: [email protected] [mailto:[email protected]] On Behalf Of David E. Smith > Sent: Friday, May 20, 2011 11:34 AM > To: WISPA General List > Subject: Re: [WISPA] Tranzeo TR5A Tx power > > > On Fri, May 20, 2011 at 13:13, Josh Luthman <[email protected] <mailto:[email protected]>> wrote: > What I did with Ubnt is set it to station and look for ssid oisjdofijsodijfosijdofijsfd > > So YOU'RE the one connecting to my home network! :) > > Even with a gibberish SSID, the radio will still be active. With Ubiquiti gear, it's probably better to just explicitly disable the WLAN interface. > > For the OP, though, I don't think Tranzeo gear gives you a way to do this. Setting it to station mode, looking for a gibberish SSID, and turning the Tx power down, is probably the next best thing to simply unplugging the power cord. (Is this radio someplace where pulling the power would be inconvenient?) > > David Smith > MVN.net > ________________________________ > > No virus found in this message. > Checked by AVG - www.avg.com<http://www.avg.com> > Version: 10.0.1375 / Virus Database: 1509/3649 - Release Date: 05/20/11
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
