I asked this on the UBNT forum but received no answer. The 802.11n specification states that when an AP is set to 40MHz channels it should allow older gear that's only capable of 20MHz channels to connect in that mode as well.
With 2.4GHz UBNT gear I'm finding that if the AP is set to 40MHz then that's all it will allow clients to connect at - clients that are not capable of 40MHz channels just don't connect. Apple gear and some others won't do 40MHz in the 2.4GHz band. Does anyone know if there's any cards that could be used the MT routerboards that could do both 40MHz and 20MHz channels simultaneously? Thanks! Greg -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
