That unit looks to be a 48v based system. I don't have the specific connectors for it. The model we use is http://www.tripplite.com/en/products/model.cfm?txtSeriesID=934&txtModelID=3180
We don't get Tripplite snmp cards as they seem to have a high failure rate and the packetflux can give us the same. For batteries, I guess you could use sealed type, but we have just been using the Deepcycle from the local hardware store. for the connector, I don't remember the company off hand but can look it up ---------------------------------------------------- Scott Piehn ----- Original Message ----- From: "Matt" <[email protected]> To: "WISPA General List" <[email protected]> Sent: Saturday, September 17, 2011 8:21 PM Subject: Re: [WISPA] UPS With SNMP Support >> I know this is going to be different from most people, but we use >> Tripplite. >> The dual conversion models (I think the clean power helps with lockups). >> The run time sucks on the base unit, but I found the connector they use >> for >> add on battery packs. The 1000va unit is a 24 volt based system, and it >> doesn't appear to damage deep cycle batteries, so just hook us as many >> pairs >> as you need. Plastic boxes with #6 jumper cables works very well for 4 >> batteries mounted upright, or the same box can hold 6 batteries laying on >> the ground. Then we add a packetflux to monitor battery voltage and AC >> voltage via some left over transformer. Use a chart on your monitoring >> software to give you percentage of battery and alerting on the AC side. >> >> We do not do a LVD. 2 deep cycles gives us 24 hours at most sites, so we >> just send someone out after 20 hours if the power is going to be out >> longer. > > Was looking at this model: > > http://www.tripplite.com/en/products/model.cfm?txtModelID=4387 > > Offers SNMP and email alerts. Noticed the connector on the back. > Wander if we can build our own external packs as well? Does this look > like the same connector as your units? What did you use for > batteries? I am guessing 72 volt? > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
