Happened with the 1100 version too. The easiest part to get right and they didn't. I don't think the 3 prongs are normal I tried multiple cords and no dice. Wiggle the cord the power shuts off.
Our solution? Use the POE port to power the device. Problem solved. Even though I have no desire to own a 1200 I figured they could have at least fixed the issues with the 1100s... Guess not. Scott Carullo Technical Operations 855-FLSPEED x102 ---------------------------------------- From: "Paolo Di Francesco" <[email protected]> Sent: Monday, September 19, 2011 1:43 PM To: "WISPA General List" <[email protected]> Subject: [WISPA] Mikrotik Rb1200 - issues with the power cord Hi All, I have put on the table some RB1200 and I have noticed that sometimes when we move or hit those boxes they turn off. The power cord, looks wead and not so "stable". So I was thinking it's only one defective unit, then I noticed it's the same on the units we received. Do you have a similar behaviour from RB1200? Solutions or workarounds? Thank you -- Ing. Paolo Di Francesco Level7 s.r.l. unipersonale Sede operativa: Largo Montalto, 5 - 90144 Palermo C.F. e P.IVA 05940050825 Fax : +39-091-8772072 assistenza: (+39) 091-8776432 web: http://www.level7.it ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
