> I have just completed testing and using a RocketM365 with a Nano365 with a KPP reflector and I was able to get close to 16 megs!
5mhz channel? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jan 18, 2012 at 10:08 AM, Doug Clark <[email protected]> wrote: > I load my 5 gig UBNT APS with 45 clients on a 10 meg channel and > they all are able to pull between 18 and 24 megs down at all times. I do > not think you have anything > to worry about even on a 5 meg channel. I have just completed testing and > using a RocketM365 with a Nano365 with a KPP reflector and > I was able to get close to 16 megs! > > > > > *-------Original Message-------* > > *From:* Carl Shivers <[email protected]> > *Date:* 1/17/2012 8:58:47 AM > *To:* 'WISPA General List' <[email protected]> > *Subject:* [WISPA] Ubiquiti 3.65 APs > > > We are planning to sell a mixture of speeds using our Ubiquiti 3.65 APs; > 1,3,5 and 10 Mbps circuits. We are a bit concerned on how many clients we > can get on each AP. Does anyone have some stats on this? Most of our > customers would be in the 1 and 3 Mbps range. Only a few are purchasing the > 5 and 10 Mbps circuits.**** > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
