Yeah I know it's not a good solution for a production router, that's why I said it depends on your situation... this is also why we don't use WinBox :)
Matt Hoppes Director of Information Technology Indigo Wireless +1 (570) 723-7312 On 1/23/12 1:01 PM, Faisal Imtiaz wrote: > Thanks.. > > I was hoping that there would be a better way ... something like clear > connection .....type command.. > > ---rather an obscure but realistic situation------------------- > ROS 5.x , Winbox connection can cause as much as 50% increase in CPU > utilization. > This gets to be of concern on core routers, running BGP full peering, > multiple peers... > so if multiple folks are looking at the box, sometimes it becomes > necessary to 'kick' a winbox user off.... > other wise... you simply wait and watch !!!! > ---------------------- > While rebooting does do the trick, but it is not a viable option for > production router !!! > There has to be a way to do this.... > > :) > > > Regards. > > Faisal Imtiaz > Snappy Internet& Telecom > 7266 SW 48 Street > Miami, Fl 33155 > Tel: 305 663 5518 x 232 > Helpdesk: 305 663 5518 option 2 Email: [email protected] > > > On 1/23/2012 11:50 AM, Josh Luthman wrote: >> If you have one of those sessions that hang out there even though the >> PC was melted 6 months ago...I haven't seen it cause any problems. >> Butch suggests the same. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Mon, Jan 23, 2012 at 11:49 AM, Matt Hoppes >> <[email protected]> wrote: >>> Reboot? >>> >>> Other than that I'm not sure. You should be able to have multiple >>> connections though -- unless someone got in that shouldn't have been. >>> In which case change password, reboot is probably the fastest way out. >>> >>> >>> Matt Hoppes >>> Director of Information Technology >>> Indigo Wireless >>> +1 (570) 723-7312 >>> >>> On 1/23/12 11:43 AM, Faisal Imtiaz wrote: >>>> Hello, >>>> >>>> Anyone know on how to disconnect a remote winbox user or ssh user via >>>> command line on a Mikrotik ? >>>> >>>> Thanks. >>>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
