Used to use a bucket for the stuff. Now I have a pole where the battery, pico and NSM2 attach. Hardest/slowest part is making the mold for the battery.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, May 16, 2012 at 2:09 PM, Chris Fabien <[email protected]> wrote: > Carry it all with you on the roof. Small battery, small wireless > travel router, use a smartphone to check signal level. I made an > adapter to use my 18v cordless drill batteries. One possible issue is > if you use 2.4ghz CPE and your portable router is on same freq, you > can't do a reliable speed test. Netbook + battery pack is another > option, but you need 3 hands, one to hold CPE, one to hold netbook and > one to work mouse. Smartphone works much better. > > > On Wed, May 16, 2012 at 2:05 PM, Darin Steffl <[email protected]> wrote: >> Hey guys, >> >> Trying to figure out a good way to do site surveys and monitor signal >> strength while on the customer's roof for a one-man job. The best I have >> come up with is having a portable power pack on the ground with a POE >> injector with two ethernet cables: one going to the nanobridge, one to a >> netbook or laptop on the roof. Another option would be to have the same >> setup but with a wireless router with the battery pack and poe injector so >> only one ethernet going to the roof to the nanobridge and either a netbook >> or android tablet to login to AirOS to setup and check signal levels. >> >> Any advice on how you guys do this with one person? Thanks! >> >> -- >> Darin Steffl >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
