A good thing to know about the UBNT gear is if for some reason supplying PoE via the "main" port stops working, you can supply PoE via the "secondary" port whether or not the PoE passthrough option is enabled.
Greg On May 29, 2012, at 5:09 PM, Carl Shivers wrote: > Is this on the advanced tab? Also, I was reading where people enabled this > and then their radio was bricked?? > > From: [email protected] [mailto:[email protected]] On > Behalf Of timothy steele > Sent: Tuesday, May 29, 2012 1:14 PM > To: WISPA General List > Subject: Re: [WISPA] Power over Ethernet Ubiquiti Radios > > you have to enable POE Pass through in the GUI of the NSM > > On Tue, May 29, 2012 at 12:55 PM, Carl Shivers <[email protected]> wrote: > Our vendor told us that if we purchase the higher watt power adapter that we > can use the same power adapter for both our Nanostation and our Pico. Is > there a setting in the Nano we need to turn on for the second POE for the > Pico? > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
