Tranzeo is down-converted from 2.4GHz on the 902 series. With their superior shielding doubtful it would cause an issue. I have a Ubiquiti 2.4 Bullet not the HP series connected to a 24db grid on CH11, a NanoStation2 AP on CH1 and a 902-11f on 907 MHz on a water tank same vertical height, about 30 ft separation around the catwalk on the tank and have no issues.

I have a NanoStation2 mounted 2 ft directly above a 120 Ubiquiti sector at 900MHz on the same tower with no issues. Single Ubiquiti running 907 - 5MHz wide and the NanoStation2 on channel 1 20MHz wide channel.


Dave Hulsebus



On 8/3/2012 12:06 PM, ~NGL~ wrote:
900 = Tranzeo TR 902
2.4 = Bullet2 HP
NGL
Sent: Friday, August 03, 2012 9:02 AM
Subject: Re: [WISPA] 900 AP's and 2.4 AP's

Canopy?  Next to none.

Ubiquiti?  Watch out - 900 is downconvertered 2.4 =(

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Fri, Aug 3, 2012 at 12:00 PM, ~NGL~ <[email protected]> wrote:
Is there any problem having 900 AP's and 2.4 AP's on the same tower? They will be about 3 foot apart.
Thanx
NGL
 
If you can read this Thank A Teacher.
And if it's in English Thank A Soldier!

_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless



_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless


_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

-- 
David Hulsebus
Portative Technologies, LLC
1995 Allison Lane, Suite 100
Corydon, IN 47112
812-738-7007
www.portative.com

_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to