That is the chipset actually... so whats that mean exactly. You said no support in 5.x That doesn't mean I'm going to have to suffer with 6.1 does it.... I guess at least there is hope in future without swapping out a bunch of hardware once 6x is working good..
Scott Carullo Technical Operations 855-FLSPEED x102 ---------------------------------------- From: "[email protected]" <[email protected]> Sent: Saturday, July 13, 2013 6:55 PM To: "WISPA General List" <[email protected]> Subject: Re: [WISPA] Maxxwave router MTU problem / question Check the ethernet chipset, Make sure it isn't the Intel 82583V chipset. This won't support jumbo frames in v5.X. On Sat, Jul 13, 2013 at 6:44 PM, Faisal Imtiaz <[email protected]> wrote: HI Scott, I bet you if you dropped a quick email with this question to Brian at Baltic networks you will get your answer. Regards. Faisal Imtiaz ---------------------------------------- From: "Scott Carullo" <[email protected]> To: [email protected] Sent: Saturday, July 13, 2013 4:07:08 PM Subject: [WISPA] Maxxwave router MTU problem / question I know these are fairly popular routers so I was wondering if anyone has seen this issue before.... Mikrotik v5.24 or 5.25 - go to ethernet interface and open an interface, I can't increase the MTU size greater then the default 1500. Some of the Maxxwave routers I can. No rhyme or reason between them I can tell - some just allow the MTU change some don't. Not sure if this is MT fubar or some other issue with the device. Anyone? Thanks Scott Carullo Technical Operations 855-FLSPEED x102 _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
