As already noted there are a number of sources for regulators.
The meanwell mentioned by Forrest is probably the best choice for this case
but
I'd like to add http://www.zahninc.com/ to the list.
Well built and fairly inexpensive in the step-up,step-downat lower wattages.
I have used the DCDC48/24/280 - 280 watt 48 V to 24 V @ $99
DCDC24/48/260 - 260 watt 24 V to 48 V @ $99
and DCDC6350-S-ADJ 50 Amp Voltage Regulator monster to Regulate
48 - 60 Volts. ($407)
They have a wide range of devices that they design and manufacture. Most have
a degree of adjustability to tweak to your requirements. David Zahn's designs
are
conservative so they will do everything that they say. The downside is that
you have
to convince David Zahn that your not going to burn up his device before he
will sell the first
one to you. (know how much current you need and leave some room for startup
surge current)
As a "small guy" I try to support the other "small guys" like David Zahn when
the device and price fits.
Larry
~NGL~ <[email protected]> wrote:
> I need a means to regulate the voltage coming out of the Solar Controller I
>need a constant 24 volts for Tranzeo and Ubiquiti radios. I now have between
>25 and 29 volts.
> Any suggestions?
> NGL
> If you can read this Thank A Teacher.
> And if it's in English Thank A Soldier!
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
