No they will be on 5725 and 5745 at least.
  From: Josh Luthman 
  Sent: Thursday, August 08, 2013 5:05 PM
  To: WISPA General List 
  Subject: Re: [WISPA] 5.8 Separation


  If you mean to have Ubnt below it <10' on the same frequency with the same 
bearing, you're going to ruin any customers on that AP.



  Josh Luthman
  Office: 937-552-2340
  Direct: 937-552-2343
  1100 Wayne St
  Suite 1337
  Troy, OH 45373



  On Thu, Aug 8, 2013 at 8:00 PM, ~NGL~ <[email protected]> wrote:


    Every thing is a duplicate link side by side.
    NGL

    From: Josh Luthman 
      Sent: Thursday, August 08, 2013 4:52 PM
      To: WISPA General List 
      Subject: Re: [WISPA] 5.8 Separation


      Get as much as possible.  Are they pointing the same direction or away?  
If they're different frequencies, I would be comfortable with 5 feet.



      Josh Luthman
      Office: 937-552-2340
      Direct: 937-552-2343
      1100 Wayne St
      Suite 1337
      Troy, OH 45373



      On Thu, Aug 8, 2013 at 7:50 PM, ~NGL~ <[email protected]> wrote:

        10 foot is hard to get on a 65 foot tower, what is the minimum I can 
get away with?
        Thanx
        NGL
          From: Josh Luthman 
          Sent: Thursday, August 08, 2013 4:46 PM
          To: WISPA General List 
          Subject: Re: [WISPA] 5.8 Separation


          If the Tranzeo AP is at 5725 in 20 MHz you'll want to be 5745 (or 
farther, which is better) on the Ubnt.



          Josh Luthman
          Office: 937-552-2340
          Direct: 937-552-2343
          1100 Wayne St
          Suite 1337
          Troy, OH 45373



          On Thu, Aug 8, 2013 at 7:42 PM, ~NGL~ <[email protected]> wrote:

            What do you mean by spectrum separation?
            NGL
              From: Josh Luthman 
              Sent: Thursday, August 08, 2013 4:38 PM
              To: WISPA General List 
              Subject: Re: [WISPA] 5.8 Separation


              Ideally 10 feet vertically.  Assuming you have spectrum 
separation, too.



              Josh Luthman
              Office: 937-552-2340
              Direct: 937-552-2343
              1100 Wayne St
              Suite 1337
              Troy, OH 45373



              On Thu, Aug 8, 2013 at 7:37 PM, ~NGL~ <[email protected]> wrote:

                We have the following setup:
                Tower 1 = Tranzeo  TR-5 plus AP
                Tower 2 = Tranzeo TR-5 plus CPE     +   TR-5 plus AP
                Tower 3 = Tranzeo TR-5 plus CPE 
                These have worked fine for several years, now we want to add a 
duplicate  link using Nanobridges 5.8 instead of the Tranzeo TR-5 Plus gear.

                How much physical separation should we plan on between the 
Tranzeo units and the Nanobridges?
                                                                                
       
                Thanx
                NGL


                     If you can read this Thank A Teacher.
                      And if it's in English Thank A Soldier! 


                _______________________________________________
                Wireless mailing list
                [email protected]
                http://lists.wispa.org/mailman/listinfo/wireless






------------------------------------------------------------------


              _______________________________________________
              Wireless mailing list
              [email protected]
              http://lists.wispa.org/mailman/listinfo/wireless



            _______________________________________________
            Wireless mailing list
            [email protected]
            http://lists.wispa.org/mailman/listinfo/wireless






----------------------------------------------------------------------


          _______________________________________________
          Wireless mailing list
          [email protected]
          http://lists.wispa.org/mailman/listinfo/wireless



        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless






--------------------------------------------------------------------------


      _______________________________________________
      Wireless mailing list
      [email protected]
      http://lists.wispa.org/mailman/listinfo/wireless



    _______________________________________________
    Wireless mailing list
    [email protected]
    http://lists.wispa.org/mailman/listinfo/wireless






------------------------------------------------------------------------------


  _______________________________________________
  Wireless mailing list
  [email protected]
  http://lists.wispa.org/mailman/listinfo/wireless

<<inline: flag.gif>>

_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to