I get beam clamps and other required hardware from a local electrical supplier. I would put a beam clamp on the bottom of one of the beams going left to right. Bolted to that would be a Minerallac clamp for the size pipe you are using. We would use 1-1/2" EMT. Another beam clamp and pipe clamp at the top of the beam that runs up and down in the picture. We do 10' pipe as long as we can get more than 2' separation of the clamps. Shorter pipe if clamps closer together. Also depends on what is going on it, but that is a general rule.
On 9/25/2013 7:40 PM, Faisal Imtiaz wrote: > Do a google search for Beam Clamps. > You can get creative with them along with Struts. > > Regards. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: [email protected] > > ----- Original Message ----- >> From: "Joshua Zukerman" <[email protected]> >> To: [email protected] >> Sent: Wednesday, September 25, 2013 5:12:05 PM >> Subject: Re: [WISPA] Need mast mounting bracket for I-Beam >> >> Forgot to include a photo (120KB attached). >> >> >> On Wed, Sep 25, 2013 at 5:05 PM, Joshua Zukerman >> <[email protected]>wrote: >> >>> Hello list, >>> >>> I have a client that I am setting up a PtP wireless link between two >>> buildings. The antenna will be going on the roof of a service station, that >>> has steel I-beams going across it. I want to mount a 5' mast (RadioShack >>> mast) to the I-Beam if possible. What brackets are made for this >>> application? >>> >>> Thanks, >>> >>> -- >>> Joshua Zukerman >>> President >>> Snow Pond Technology Group Inc. >>> www.snowpondtech.com >>> >> >> >> -- >> Joshua Zukerman >> President >> Snow Pond Technology Group Inc. >> www.snowpondtech.com >> >> _______________________________________________ >> Wireless mailing list >> [email protected] >> http://lists.wispa.org/mailman/listinfo/wireless >> > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2013.0.3408 / Virus Database: 3222/6697 - Release Date: 09/25/13 > > -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
