Yep, I have used for both. There is also another model we are trying out at tower sites that slides into a APC surge. 444-APC
From: [email protected] [mailto:[email protected]] On Behalf Of Mike Hammett Sent: Thursday, November 14, 2013 9:31 AM To: WISPA General List Subject: Re: [WISPA] Surge Protection for UBNT Gear There's no difference between "APs" and "CPE". ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com _____ From: "Sam" <[email protected] <mailto:[email protected]> > To: [email protected] <mailto:[email protected]> Sent: Thursday, November 14, 2013 8:29:46 AM Subject: Re: [WISPA] Surge Protection for UBNT Gear One last question - the Wireless Beehive web page states these suppressors are for CPE. Have you found they work well on the tower for the Rockets as well? Thanks Sam On 11/14/2013 08:10, Josh Luthman wrote: > In that case I'd also go with WB. Look at Matt's suggestion. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > I thought the same thing Josh. But our tower guys insist on additional > surge protection. For example, they said: > > "We have a surge protector that we install on the Cambium (Orthogon) PTP > radio product when the radios are mounted up the tower, but it is > proprietary to Cambium since they have their own scheme for powering the > radios over the Ethernet cable where standard Ethernet surge protectors > will not work. If the radio vendor is not following industry standard > POE pinouts and voltage levels for the cable running up the tower, > finding a suitable surge protector may be difficult unless they are like > Cambium and OEM their own flavor of Surge Protector." > > So I was hoping to find something similar for the UBNT products... > > Sam > > > On 11/14/2013 08:04, Josh Luthman wrote: > > Shielded cable and stock poe? > > > > Josh Luthman > > Office: 937-552-2340 <tel:937-552-2340> > > Direct: 937-552-2343 <tel:937-552-2343> > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Nov 14, 2013 9:01 AM, "Sam" <[email protected] > <mailto:[email protected]%0b> > <mailto:[email protected]> > > <mailto:[email protected] > <mailto:[email protected]%20%3cmailto:[email protected]> > <mailto:[email protected]>>> wrote: > > > > What have you found to be the best surge protection for UBNT > gear? I see > > where a couple of guys on one of the UBNT lists suggest a > "Magic-Bullet" > > (http://magicsurge.com/catalog/) but I thought I'd ask what the > people > > using this every day recommend. > > > > Thanks > > Sam _______________________________________________ Wireless mailing list [email protected] <mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
