We use the Fluke Microscanner2 as it will allow PoE and will test without the other end being on. You can see cable length, PoE, and if there is a switch/Ethernet at the other end.
Eric Rogers Precision Data Solutions, LLC (317) 831-3000 x200 From: [email protected] [mailto:[email protected]] On Behalf Of Mark Spring Sent: Tuesday, January 28, 2014 10:49 AM To: WISPA General List Subject: [WISPA] Cable Testers can anybody make any recommendations for cat5/cable testers they have had good luck with? We had good luck with the testum(jdsu) testers but apparently they were discontinued. We are looking at the micromapper from fluke but something with a little more detail might help. Fluke makes bigger brothers to the micromapper but they are a little more than economical. Thanks, Mark Spring Systems Analyst New Knoxville Telephone Company 301 W. South St. New Knoxville, OH 45871 419.753.5000 This message and the file(s) attached are confidential and proprietary information of NKTelco for the sole use of the intended recipient. Any unauthorized review, distribution, disclosure, copying, use, or dissemination, either whole or in part, is strictly prohibited. Do not transmit these documents, in any form, to any third party without the expressed written permission of NKTelco.
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
