Auto doesn't always work right on gig ports. Try and make sure you and AT&T are 
set the same. Watch the interface stats and see if u have any errors etc. 
Mismatched interfaces are always a problem. 

I'd use the in net tests to give u better info. If u want to use speed test.net 
use Washington as it's close to the heavily used ashburn peering point. I 
prefer myspeed.visualware.com and use Dulles location close to ashburn. 


But sort out any interface issues first. Call AT&T and find out if they see 
any. 

Leon

Sent from my iPhone

> On Feb 24, 2014, at 12:37 PM, Roger Howard <[email protected]> wrote:
> 
> 
> Thanks, some good points. It's an edgerouter lite. CPU stays low. It's around 
> 3%. I was having trouble originally, when AT&T had their switch port set at 
> 100/full, and the edgerouter was too. I was only getting 1-2mbps on the 
> upload. I finally got AT&T to switch their port to auto negotiate. Now it's 
> communicating at a gigabit and upload speeds are much better. However, it 
> seems like something is still not quite right.
> 
> Even when it was at 100/full I could plug in my laptop directly at 100/full 
> and get good speeds. But going through the edgerouter was poor. I need to try 
> plugging in directly again now that the switch port is on auto negotiate. 
> 
> I think I'm going to have to go down there during the night and plug in 
> directly and do some testing. Figure out if it's the edgerouter that is the 
> problem or the fiber link itself.
> 
> Thanks,
> Roger
> 
> 
> 
>> On Mon, Feb 24, 2014 at 11:27 AM, Steve Barnes <[email protected]> wrote:
>> How is your CPU on your router?  65 mbps sounds low for sure.  If you are on 
>> a 100 Mbps circuit have you ever plugged a PC in directly and made sure you 
>> are getting the speed. With 100 M setup 92 is about the Max but you have a 
>> long way to get to there.   What type of router?
>> 
>>  
>> 
>> Things to look at:
>> 
>> Router CPU Load (while running test)
>> 
>> Queues setup wrong
>> 
>> Poor cable between upstream and router.
>> 
>> Wrong Handshaking from upstream.
>> 
>>  
>> 
>> Steve Barnes
>> 
>> General Manager
>> 
>> PCSWIN.com
>> 
>> Howard LLC.
>> 
>>  
>> 
>> From: [email protected] [mailto:[email protected]] On 
>> Behalf Of Roger Howard
>> Sent: Monday, February 24, 2014 12:18 PM
>> 
>> 
>> Cc: WISPA General List
>> Subject: Re: [WISPA] AT&T MIS Throughput
>>  
>> 
>> Yes, it's doing around 20-25mbps download right now, and less than 3 megs on 
>> the upload. When I'm running the test, the download speed on the router 
>> climbs to about 50mbps.
>> 
>>  
>> 
>> On Mon, Feb 24, 2014 at 11:13 AM, Steve Barnes <[email protected]> wrote:
>> 
>> Roger are you looking at your router while you are doing these speed tests.  
>> If you are already pushing out doing 60 Meg of traffic then you cant add 
>> another 100 on top of that .
>> 
>>  
>> 
>> Steve Barnes
>> 
>> General Manager
>> 
>> PCSWIN.com
>> 
>> Howard LLC.
>> 
>>  
>> 
>> From: [email protected] [mailto:[email protected]] On 
>> Behalf Of Roger Howard
>> Sent: Monday, February 24, 2014 11:55 AM
>> Cc: WISPA General List
>> Subject: Re: [WISPA] AT&T MIS Throughput
>> 
>>  
>> 
>> What about this one? I just got 23Mbps down and 66 up.
>> 
>> 
>> http://www.att.com/speedtest/
>> 
>>  
>> 
>> On Mon, Feb 24, 2014 at 10:52 AM, Zach Mann <[email protected]> wrote:
>> 
>> It's hard to trust a random server on speedtest dot net.   If Att has their 
>> own server on that site I would expect similar results as the Att test being 
>> it's on the same network 
>> 
>> 
>> 
>> On Monday, February 24, 2014, Roger Howard <[email protected]> wrote:
>> 
>> Hi,
>> 
>>  
>> 
>> I can max out my 100Mbps fiber connection by uploading 10 files 
>> simultaneously to an AT&T test server. But single stream speed tests like 
>> speedtest.net and speakeasy.net/speedtest seem to be all over the place. 
>> like sometimes less than 10mbps, sometimes more than 50mbps. Is it just me, 
>> or do those test sites do that for everyone?
>> 
>>  
>> 
>>  
>> 
>> 
>> _______________________________________________
>> Wireless mailing list
>> [email protected]
>> http://lists.wispa.org/mailman/listinfo/wireless
> 
> _______________________________________________
> Wireless mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to