I ran into this same issue using Cisco, so I don't think I'd blame the Tik.
We needed to get that facility opened so we wound up sticking a scope on the downstream LAN interface until firmware further matures. Everything else works fine. ___________________________ Mangled by my iPhone. ___________________________ Tyler Treat Corn Belt Technologies, Inc. [email protected]<mailto:[email protected]> ___________________________ On Mar 16, 2014, at 3:03 AM, "Chris Fabien" <[email protected]<mailto:[email protected]>> wrote: I tried to switch traffic over to a new backhaul that is using ePMP radios in a ptp configuration. We use Mikrotik DHCP Relay feature on our network to relay requests to the powercode BMU in the NOC. The ePMP raidos do not appear to pass this traffic - can see 15pps of dhcp requests going in to the one side of the link and nothing coming out to the router on the other side. Using Ubiquiti radios we always set WDS mode which passes DHCP - on mikrotiks it works as well. Is this really not supported on ePMP? Hard to believe... I did find this FAQ on their website which seems to indicate it's a known issue but there is nothing in the release notes. http://epmp.community.cambiumnetworks.com/customer/portal/questions/4596456-broadcast-transmission?b_id=646 Anyone run in to this or figure out how to get around it? Chris Fabien LakeNet LLC
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
