Approaching -60
Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr From: Faisal Imtiaz <[email protected]<mailto:[email protected]>> Reply-To: WISPA General List <[email protected]<mailto:[email protected]>> Date: Sunday, August 10, 2014 at 9:10 PM To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Mimosa Calcs and Noise? Be-careful for what you ask for... Gino has to do his calc, by setting the noise floor to -72 We are fast approaching something similar in downtown Miami.. :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Jaime Fink" <[email protected]<mailto:[email protected]>> To: "WISPA General List" <[email protected]<mailto:[email protected]>> Sent: Sunday, August 10, 2014 7:49:28 PM Subject: Re: [WISPA] Mimosa Calcs and Noise? Hi Gino, First, thanks for using the Design tool! Sorry for the delay in response, one of my colleagues appears to be caught in the WISPA members list first time use jail syndrome ;) The noise floor row in the link budget is not set statically to –95 dBm. It is actually calculated based on average temperature at the location, the selected bandwidth, and the receiver noise figure. This is the Thermal Noise Floor for the receiver to give it a more accurate description. The intent with the Interference Loss value was to allow users the ability to define additional noise above the thermal noise floor. What we are discussing internally and would welcome the rest of the group to weigh in on, is to rename “Interference Loss” to “Noise Floor Override” and replace the calculated (Thermal) Noise Floor with the override value if it is greater. This would allow a higher value to be specified where you know there is a higher noise floor present where the radio will be deployed. Please keep the comments and suggestions coming, we have tons of work going on in this tool to keep adding and improving constantly. There is a direct feedback form on the Design tool on the bottom left hand corner, that is the quickest way to get straight to our Engineers and make sure we don’t miss anything. Cheers! Jaime Fink • Mimosa • Chief Product Officer 300 Orchard City Dr Ste 100 • Campbell • CA 95008 • www.mimosa.co<http://www.mimosa.co> This email may contain confidential and privileged material for the sole use of the intended recipient(s). Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. On Aug 7, 2014, at 6:01 AM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: Where do adjust the noise figure for real capacity measurements? Noise loss? Whats that? Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com<http://www.aeronetpr.com> @aeronetpr _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
