Dual stack is a different architecture than having two separate networks running with one running IPv4 and one running IPv6. To connect the two disparate networks you would need to perform address family translation (NAT64). In dual-stack it will prefer IPv6 when available, minus happy eyeballs, but otherwise has legs or transit via both protocols to access the necessary resource if it is either IPv4 or IPv6.
To start I would ask to clarify what you are trying to do and I'd be happy to help in anyway I can. I'm a bit of an IPv6 crazy. Tim On Tue, Oct 25, 2016 at 2:41 PM, Art Stephens <[email protected]> wrote: > Any out there successfully deployed dual stack network can share what > equipment used for pure ipv6 access to ipv4 networks? > > -- > Arthur Stephens > Senior Networking Technician > Ptera Inc. > PO Box 135 > 24001 E Mission Suite 50 > Liberty Lake, WA 99019 > 509-927-7837 > ptera.com | > facebook.com/PteraInc | twitter.com/Ptera > ----------------------------------------------------------- > ------------------ > "This message may contain confidential and/or propriety information, and > is intended for the person/entity to whom it was originally addressed. > Any use by others is strictly prohibited. Please note that any views or > opinions presented in this email are solely those of the author and are not > intended to represent those of the company." > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
