On Wed, Nov 2, 2016 at 2:43 PM, Colton Conor <[email protected]> wrote: > > - At Least 1 SFP fiber uplink port. 2 would be nice for daisy chaining, but > not required. > - 4 to 8 Copper Gigabit Ports. I don't need POE output power on these ports. > - SNMP For remote monitoring > - CLI or some sort of web based remote management > - Temperature Hardened or able to be in a hot attic > - Some sort of L2 port isolation or private vlans where other subscribers > can see each other. All traffic goes in and out of uplink > - Rate limiting for each individual port > - Full duplex speed and wireline switching is preferred. > - We be nice to be remotely powered using PoE in, but not required. Might be > hard however to get power to the attic or side of building. > > > So far, options that come to mind are: > > https://routerboard.com/RB260GS for $36. Looks like a good option, but not > sure about SwitchOS. Worried Mikrotik won't continue to improve switchOS. > Feature set seems limited. Not sure about port isolation options? Says it > support Poe-In for power. Temp range looks good. No CLI.
There have been several updates to SwOS over the past couple years (currently at 1.17), but I would recommend a 2011, 3011, or CRS--all of which run RouterOS--over a SwOS device. ROS has far, far more features that you would want to have in this situation. (I only use SwOS for passive PoE distribution: RB260GSP.) Daniel Harling <>< Engineering, Cape Ann Communications 183 Main Street, Gloucester, MA 01930 978-879-7744 (cell) [email protected] _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
