I've recently been looking at arista switches to do something similar. Wonder how they would act?
On Nov 7, 2016 8:58 AM, "TJ Trout" <[email protected]> wrote: > I have a 10G switch that is switching everything of mine at my NOC, > including peers, router wan, router lan, uplink to tower, etc > > During peak traffic periods ~2gbps I'm seeing 1% packet loss and > throughput will drop to 0 for just a second and resume normal for a few > minutes before dropping back to zero for just a second. doesn't seem to be > affecting the wan side of my router which connects to peers through the > same switch. Doesn't happen during the day with low periods of traffic. > > I've enabled / disabled STP, Flow control. > > I believe I've isolated it to not be a single port, possibly have a bad > switch but that seems hard to believe... > > Port isn't flapping, getting small amounts of fcs errors on receive and > lots of length errors but i think those shouldn't be a problem? > > It's an IBM G8124 10G switch > > Ideas? > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
