https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4506
--- Comment #1 from Jaap Keuter <[email protected]> 2010-02-19 08:38:05 CET --- (In reply to comment #0) > Build Information: > Version 0.99.8 (SVN Rev 24492) You should really try to use a more up to date version. If you have private plugins demand an update from the supplier. > Cannot capture anything but broadcast packets through a hub after attempting a > capture at a customer site. Are you 1000% sure it's a hub? Many so called hubs are actually switches in disguise, see http://wiki.wireshark.org/HubReference > Now all I can capture are broadcast traffic even in > my home network. Are you capturing in promiscuous mode? That's one of the capture options. Another Windows XP computer loaded with the same versions (in > this case 0.99.8)will capture all packets. The capture that also contains only > broadcast traffic contains the following type of captures: > "1 0.000000 96.16.49.83 192.168.1.104 TLSv1 Encrypted Alert" (I > have attached the complete packet capture). Than I assume your interface is 192.168.1.104, so you see your own traffic. 96.16.49.83 is from akamaitechnologies.com > The other XP service pack 3 computer captures non broadcast traffic but does > not contain any of the above packets going to and from 96.15.49.83. That one probably has promiscuous capture enabled. and it doesn't have a link up with Akamai Technologies. > On the computer I having the problem with, I have done a system restore, > deleted wireshark and winpcap but I still have the same problem. Also, another > user at the same site also experienced the exact same problem. That's probably also because the hub is no real hub. -- Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. ___________________________________________________________________________ Sent via: Wireshark-bugs mailing list <[email protected]> Archives: http://www.wireshark.org/lists/wireshark-bugs Unsubscribe: https://wireshark.org/mailman/options/wireshark-bugs mailto:[email protected]?subject=unsubscribe
