Checked in. BR Anders -----Ursprungligt meddelande----- Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Rene Pilz Skickat: den 27 november 2006 23:08 Till: Developer support list for Wireshark Ämne: Re: [Wireshark-dev] frame relay bugfix
Hi This patch consists also the last issues. Additionally it solves: - For the SSCOP frames the AAL5 decoding was not performed due to an earlier patch. This caused that no SSCOP message was properly decoded. - As the detection between a LANE frame and a SSCOP frame is rather hard a switch within the atm dissector is included which enforce SSCOP dissecting over a LANE frame. At the moment I do not see a better solution for that. Rene Pilz On Fri, 2006-11-24 at 15:53 +0100, Rene Pilz wrote: > Hi > > Attached is a patch for following items: > - Frame Relay: Calculate the size of the frame relay header larger than > 2 bytes correctly > - ERF File: In approx 10% of the cases ethereal is not able to recognize > the ERF file correctly. So the file format check of erf is moved more to > the beginning of the function. This is not real a solution, but as erf > files are not that seldom this might be acceptable. > - Added Columns: Add columns for DLCI (Frame Relay) and TLLI (GSM > BSSGP). As these are crucial Identifiers within this protocol this is > rather useful. At least they asked me several times. > > So please take a look at it. Thanks. > > Best Regards > Rene > > _______________________________________________ > Wireshark-dev mailing list > Wireshark-dev@wireshark.org > http://www.wireshark.org/mailman/listinfo/wireshark-dev -- Dipl-Ing (FH) MSc. C.E René Pilz ftw. Telekommunications Research Center Vienna http://www.ftw.at Tech Gate Vienna, Donaucitystraße 1, A-1220 Wien Mobile: +43 664 8269871 Office: +43 1 5052830-13 Fax: +43 1 5052830-99 _______________________________________________ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev