Hi, This is most probably a bug. Please file a bug report, preferably with a sample trace. Best regards Anders
________________________________________ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Xavier Ameziane Skickat: den 26 mars 2007 12:29 Till: wireshark-dev@wireshark.org Ämne: [Wireshark-dev] Diameter AVP decoding : Same AVP codes withdifferent names Hello I have a question about the way Wireshark decodes Diameter AVP. Is the "ApplicationID" taken into account when Wireshark decodes an AVP ? Example : - in 3GPP CX/DX Application(ID=16777216, 3GPP TS 29.228 and 29.229), the AVP code 1 is "Visited-Network-Identifier". The vendor-Id for this AVP is TGPP (10415) - in 3GPP Gmb Application (ID=16777223, 3GPP TS 29.061), the AVP code 1 is "3GPP-IMSI". The vendor-Id for this AVP is also TGPP (10415) I created my own dictionnary for 3GPP Gmb Application and, normally, Wireshark should display the right name according to the "ApplicationID" but I don't think it is the case... Wireshark always displays me the value in 3GPP Gmb dictionnary. If I erase the AVP code 1 from my "3GPP Gmb" dictionnary, it displays the AVP name contained in the "3GPP CD/DX" dictionnary...as if it doesn't take into account the ApplicationID... Is it normal ? Do I make a mistake somewhere in my understanding ? Thanks by advance Xavier ________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses. _______________________________________________ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev