Hi, ip.access have developed a basic dissector for this protocol which we will happily add to the project - I'll raise a bug report and attach the file. At present it only handles the uncompressed RTP header case, but should provide a starting point for further development. BTW we have called the protocol nb_rtpmux, as the 29.414 spec is originally for the Nb interface. Regards, Neil
================================================= ip.access ltd Tel: 01954 713715 Building 2020, Fax: 01954 713799 Cambourne Business Park, Cambourne, Cambridge, CB23 6DW, UK Company Registered Number 3400157 Visit the website at http://www.ipaccess.com <http://www.ipaccess.com/> ================================================= ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of shruti singh Sent: 27 August 2009 12:36 To: Developer support list for Wireshark Subject: Re: [Wireshark-dev] Need help in Decoding RTP Multiplex streams inWireshark Hi, Yes RTP multiplexing is in compliance to 3GPP TS 29.414 Release 7 specification thanks Shruti On Wed, Aug 26, 2009 at 7:58 PM, Jaap Keuter <[email protected]> wrote: Hi, Is there an RFC on that? Are there sample captures to work with? This always helpsin development. Thanx, Jaap Now competing at http://www.ec2009.info On 26 aug 2009, at 07:36, shruti singh <[email protected]> wrote: Hi I need to decode RTP Multiplex streams using wireshark. Presently we can decode only Non -Multiplexed RTP streams in wireshark. A multiplexed voice packet is composed by concatenating RTP encapsulated voice packets and IP and UDP headers. Below is the Multiplex Packet format IP UDP Multiplex Header Compressed RTP Header RTP Payload Multiplex Header Compressed RTP Header RTP Payload This Multiplex header is repeated in beginning of each RTP packet. So I was thinking of way to extract this multiplex header & use it to decode each RTP packet following this Multiplex header. I supose we need to make a dissector packet-rtpmultiplex.c regestring to a UDP port as a starting point. Dissect the multiplex header, decompress the rtp header and have the RTP dissector dissecting the resulting "RTP packet" - decompressed header+data. Could you help me in dissecting the multiplex header and make this work. Also I need to know the steps to write our own filters in wireshark It would be great help. Kindly reply as soon as possible Regards Shruti ________________________________________________________________________ ___ Sent via: Wireshark-dev mailing list <[email protected]> Archives: <http://www.wireshark.org/lists/wireshark-dev> http://www.wireshark.org/lists/wireshark-dev Unsubscribe: <https://wireshark.org/mailman/options/wireshark-dev> https://wireshark.org/mailman/options/wireshark-dev mailto:[email protected]?subject=unsubscribe ________________________________________________________________________ ___ Sent via: Wireshark-dev mailing list <[email protected]> Archives: http://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:[email protected]?subject=unsubscribe This message contains confidential information and may be privileged. If you are not the intended recipient, please notify the sender and delete the message immediately. ip.access Ltd, registration number 3400157, Building 2020, Cambourne Business Park, Cambourne, Cambridge CB23 6DW, United Kingdom
___________________________________________________________________________ Sent via: Wireshark-dev mailing list <[email protected]> Archives: http://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:[email protected]?subject=unsubscribe
