Hi Jim, The log points to the same issue with Pascal, and please try the latest installer at: https://svn.nmap.org/nmap-exp/yang/NPcap-LWF/npcap-nmap-0.04-r3.exe
Cheers, Yang On Tue, Aug 18, 2015 at 1:45 PM, Jim Young <jyo...@gsu.edu> wrote: > SECURITY WARNING: You are receiving a message with an attachment that may > be harmful once extracted. Please do not click on any files unless you are > expecting this message and a trusted sender verified that the file > originated from them. If in doubt, please forward the message to > secur...@gsu.edu for inspection. > ========================================= > > Hello Yang, > > > I did not use a VM to test Npcap 0.04. The two Windows 8.1 systems I > tested with were running Windows directly on the hardware. > > > I installed the 0.04-r2-debug-2 image but (as expected) the Npcap Loopback > adapter was not visible to Wireshark. I started DebugView, I enabled the > two additional DebugView options you requested, I installed Npcap > 0.04-r3-debug-2, I waited for perhaps 15 to 20 seconds and then started > Wireshark. I left Wireshark up for several seconds then shut it down > because there was no loopback adapter. I let DebugTest run for a few > minutes before grabbing the attached log file. > > > I hope you find something useful in the log. > > > Jim Y. > > > ------------------------------ > *From:* wireshark-dev-boun...@wireshark.org < > wireshark-dev-boun...@wireshark.org> on behalf of Yang Luo < > hslu...@gmail.com> > *Sent:* Sunday, August 16, 2015 23:12 > *To:* Developer support list for Wireshark > *Subject:* Re: [Wireshark-dev] Npcap 0.04 call for test > > Hi Jim, > > Did you also use a VirtualBox guest to test Npcap 0.04? I think the cause > is the same with Pascal: I added Winsock Kernel init code to loopback > interface's OpenAdapter op, if the init fails, the adapter fails to be > opened. There're also two ways, first provide me the reproduce steps if you > think it's viable. The second is to use the debug version, I have updated > the version to 0.04-r2, you can use the debug one and give me the DebugView > text I documented for Pascal. > > Improvements in Npcap 0.04-r2: > 1) Wireshark now can see Npcap version 0.04 instead of 0.03. > 2) Added some trace message for WSK. > > Lastest installer: > https://svn.nmap.org/nmap-exp/yang/NPcap-LWF/npcap-nmap-0.04-r2.exe > > Lastest debug installer: > https://svn.nmap.org/nmap-exp/yang/NPcap-LWF/npcap-nmap-0.04-r2-debug.exe > > > Cheers, > Yang > > > ___________________________________________________________________________ > Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org> > Archives: https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev > mailto:wireshark-dev-requ...@wireshark.org > ?subject=unsubscribe >
___________________________________________________________________________ Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org> Archives: https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
