2016-03-14 18:07 GMT+01:00 T. Scholz <[email protected]>: > Well thanks for your help guys, but the problem is still the same ... :( > > I checked my CMakeList.txt file and compared it with Pascal's file, but I > couldn't find any difference. So I tried all the steps again ad started > with the reinstallation of cmake. (Btw. my anti-virus software "Avast" is > turned off during those steps, since it blocked my external commands on > prompt.) > > Here is the output of powershell (admin): > ########## > Extracting > cmake-3.5.0-win32-x86\share\cmake-3.5\Templates\Windows\Windows_TemporaryKey.pfx > Everything is Ok > Folders: 83 > Files: 4375 > Size: 52802077 > Compressed: 21286287 > C:\ProgramData\chocolatey\lib\cmake.portable\tools > ShimGen has successfully created a shim for cmake-gui.exe > ShimGen has successfully created a shim for cmcldeps.exe > ShimGen has successfully created a shim for cpack.exe > ShimGen has successfully created a shim for ctest.exe > The install of cmake.portable was successful. > ############## > > After that I opened my VS2013 x64 Native prompt as an admin to use my > batch file, which contains the following lines: > (I also reinstalled Cygwin to its default Path C:\Cygwin.) > ############## > @echo off > > echo Adding Environment Vars for Wireshark-Qt ... > set CYGWIN=nodosfilewarning > set WIRESHARK_BASE_DIR=D:\Development > set WIRESHARK_TARGET_PLATFORM=win64 > set QT5_BASE_DIR=D:\Development\Qt5.5\5.5\msvc2013_64 > set WIRESHARK_VERSION_EXTRA=(x64_TS_PS) > set WIRESHARK_CYGWIN_INSTALL_PATH=C:\Cygwin > set VisualStudioVersion=12.0 > title Command Prompt (VS 2013 x64) > echo Finished settings for enironment vars ... > echo Adding new directory for Wireshark x64 ... > mkdir D:\Development\wsbuild64_VS2013 > cd D:\Development\wsbuild64_VS2013 > echo Ready for preparing VS_Cmd_x64 ... > ############## > > Next steps was to use the command "cmake -DENABLE_CHM_GUIDES=on -G "Visual > Studio 12 Win64" ..\wireshark", which is mentioned at the dev guide. There > the following error occurs: > ############## > -- Performing Test CXX__w34295_w34189_VALID - Success > statuscheck linker flag - test linker flags: -Wl,--as-needed > -- Performing Test WS_LD_FLAG_VALID0 > -- Performing Test WS_LD_FLAG_VALID0 - Failed > statuscheck linker flag - test linker flags: -pie > -- Performing Test WS_LD_FLAG_VALID1 > -- Performing Test WS_LD_FLAG_VALID1 - Failed > > CMake Error at CMakeLists.txt:758 (add_subdirectory): > add_subdirectory given source > "D:/Development/wireshark-win64-libs/zlib-1.2.8-ws" which is not an > existing directory. > > > CMake Error at CMakeLists.txt:763 (set_target_properties): > set_target_properties Can not find target to add properties to: zlib > > > CMake Error at CMakeLists.txt:765 (set_target_properties): > set_target_properties Can not find target to add properties to: > zlibstatic > > > -- Packagelist: > AIRPCAP;CAP;CARES;GCRYPT;GEOIP;GLIB2;GMODULE2;GNUTLS;GTHREAD2;GTK2;Gettext;Git;HtmlViewer;KERBEROS;LEX;LIBSSH;LUA;M;PCAP;POD;PORTAUDIO;Perl;PythonInterp;Qt5Core;Qt5LinguistTools;Qt5Multimedia;Qt5PrintSupport;Qt5Svg;Qt5Widgets;Qt5WinExtras;SBC;SED;SETCAP;SH;SMI;WINSPARKLE;YACC;YAPP;ZLIB > -- Could NOT find AIRPCAP (missing: AIRPCAP_INCLUDE_DIR AIRPCAP_LIBRARY) > -- AIRPCAP NOT FOUND > -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) > -- Checking for one of the modules 'libcap' > -- Could NOT find CAP (missing: CAP_LIBRARY CAP_INCLUDE_DIR) > -- CAP NOT FOUND > -- Could NOT find CARES (missing: CARES_LIBRARY CARES_INCLUDE_DIR) > -- CARES NOT FOUND > -- Could NOT find GCRYPT (missing: GCRYPT_LIBRARY GCRYPT_INCLUDE_DIR) > (Required is at least version "1.4.2") > -- GCRYPT NOT FOUND > -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) > -- Checking for one of the modules 'geoip' > -- Could NOT find GEOIP (missing: GEOIP_LIBRARY GEOIP_INCLUDE_DIR) > -- GEOIP NOT FOUND > -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) > -- Checking for one of the modules 'glib-2.0>=2.14.0' > CMake Error at > C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148 > (message): > Could NOT find GLIB2 (missing: GLIB2_LIBRARY GLIB2_MAIN_INCLUDE_DIR) > Call Stack (most recent call first): > C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388 > (_FPHSA_FAILURE_MESSAGE) > cmake/modules/FindGLIB2.cmake:90 (find_package_handle_standard_args) > CMakeLists.txt:829 (find_package) > > > -- Configuring incomplete, errors occurred! > See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeOutput.log". > See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeError.log". > ############## > Also after executing the mentioned cmake command there is no new folder > for the lib files at "D:\Development". > > So I can't see my failure during those steps.... > I don't get it, why the error occurs. Is there a way to download the libs > manually, which should be downloaded by cmake?
Could you try running manually the following command and see what happens? powershell -ExecutionPolicy ByPass -File tools\win-setup.ps1 -Destination D:\Development\wireshark-win64-libs -Platform win64 > > > > Am 14.03.2016 um 15:46 schrieb T. Scholz: > >> The Problem is, that there is no folder at >> "D:/Development/wireshark-win64-libs". Last time I started CMake for win7 >> compilation the folder and its content was automatically be downloaded, but >> right now I don't know how to get the folder with its content by myself. >> >> At which part will it be downloaded? Maybe there Is a failure at this >> point? >> >> Regards >> >> >> Am 14.03.2016 um 10:57 schrieb T. Scholz: >> >>> Hello everyone, >>> >>> today I tried to compile Wireshark for my laptop. (win10 - x64) >>> Therefore I just did the same as I did before for win7 compilation >>> mentioned in the dev guide. Right now I'm getting an Error using CMake: >>> >>> ################################ >>> CMake Error at CMakeLists.txt:758 (add_subdirectory): >>> add_subdirectory given source >>> "D:/Development/wireshark-win64-libs/zlib-1.2.8-ws" which is not an >>> existing directory. >>> >>> >>> CMake Error at CMakeLists.txt:763 (set_target_properties): >>> set_target_properties Can not find target to add properties to: zlib >>> >>> >>> CMake Error at CMakeLists.txt:765 (set_target_properties): >>> set_target_properties Can not find target to add properties to: >>> zlibstatic >>> >>> >>> -- Packagelist: >>> AIRPCAP;CAP;CARES;GCRYPT;GEOIP;GLIB2;GMODULE2;GNUTLS;GTHREAD2;GTK2;Gettext;Git;HtmlViewer;KERBEROS;LEX;LIBSSH;LUA;M;PCAP;POD;PORTAUDIO;Perl;PythonInterp;Qt5Core;Qt5LinguistTools;Qt5Multimedia;Qt5PrintSupport;Qt5Svg;Qt5Widgets;Qt5WinExtras;SBC;SED;SETCAP;SH;SMI;WINSPARKLE;YACC;YAPP;ZLIB >>> -- Could NOT find AIRPCAP (missing: AIRPCAP_INCLUDE_DIR AIRPCAP_LIBRARY) >>> -- AIRPCAP NOT FOUND >>> -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) >>> -- Checking for one of the modules 'libcap' >>> -- Could NOT find CAP (missing: CAP_LIBRARY CAP_INCLUDE_DIR) >>> -- CAP NOT FOUND >>> -- Could NOT find CARES (missing: CARES_LIBRARY CARES_INCLUDE_DIR) >>> -- CARES NOT FOUND >>> -- Could NOT find GCRYPT (missing: GCRYPT_LIBRARY GCRYPT_INCLUDE_DIR) >>> (Required is at least version "1.4.2") >>> -- GCRYPT NOT FOUND >>> -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) >>> -- Checking for one of the modules 'geoip' >>> -- Could NOT find GEOIP (missing: GEOIP_LIBRARY GEOIP_INCLUDE_DIR) >>> -- GEOIP NOT FOUND >>> -- Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE) >>> -- Checking for one of the modules 'glib-2.0>=2.14.0' >>> CMake Error at >>> C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:148 >>> (message): >>> Could NOT find GLIB2 (missing: GLIB2_LIBRARY GLIB2_MAIN_INCLUDE_DIR) >>> Call Stack (most recent call first): >>> C:/ProgramData/chocolatey/lib/cmake.portable/tools/cmake-3.5.0-win32-x86/share/cmake-3.5/Modules/FindPackageHandleStandardArgs.cmake:388 >>> (_FPHSA_FAILURE_MESSAGE) >>> cmake/modules/FindGLIB2.cmake:90 (find_package_handle_standard_args) >>> CMakeLists.txt:829 (find_package) >>> >>> >>> -- Configuring incomplete, errors occurred! >>> See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeOutput.log". >>> See also "D:/Development/wsbuild64_VS2013/CMakeFiles/CMakeError.log". >>> ################################ >>> >>> Here is my batch file content: >>> ################################ >>> @echo off >>> >>> echo Adding Environment Vars for Wireshark-Qt ... >>> set CYGWIN=nodosfilewarning >>> set WIRESHARK_BASE_DIR=D:\Development >>> set WIRESHARK_TARGET_PLATFORM=win64 >>> set QT5_BASE_DIR=D:\Development\Qt5.5\5.5\msvc2013_64 >>> set WIRESHARK_VERSION_EXTRA=(x64_TS_PS) >>> set WIRESHARK_CYGWIN_INSTALL_PATH=C:\Cygwin >>> set VisualStudioVersion=12.0 >>> title Command Prompt (VS 2013 x64) >>> echo Finished settings for enironment vars ... >>> echo Adding new directory for Wireshark x64 ... >>> mkdir D:\Development\wsbuild64_VS2013 >>> cd D:\Development\wsbuild64_VS2013 >>> echo Ready for preparing VS_Cmd_x64 ... >>> ################################ >>> >>> Since Zlib is responsible for the error, I checked my Cygwin >>> installation whether it is installed. Looking on the package list of >>> cygwin, "zlib", "zlib-devel" and "zlib0" v1.2.8.3 are installed. >>> >>> Is it possible to compile Wireshark for win10 machines or did I just >>> make a simple mistake, which I haven't notieced yet? >>> >>> Regards >>> >>> T. Scholz >>> >>> >>> --- >>> Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. >>> https://www.avast.com/antivirus >>> >>> >> > ___________________________________________________________________________ > Sent via: Wireshark-dev mailing list <[email protected]> > Archives: https://www.wireshark.org/lists/wireshark-dev > Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev > mailto:[email protected]?subject=unsubscribe >
___________________________________________________________________________ Sent via: Wireshark-dev mailing list <[email protected]> Archives: https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:[email protected]?subject=unsubscribe
