Thanks for your idea. It's exactly the way Michael did it with his improvement for my patch: https://code.wireshark.org/review/#/c/25509/
Am 29.01.18 um 21:01 schrieb Shai Shapira: > I believe there's another possible approach here: > Register the dissector once with proto_register_protocol (as usual), which > assumed caller is TCP > register another dissection function (for SMP) using > create_dissector_handle_with_name called something like "smp.tds" > than look for this name when retrieving the dissector handle in the TDS > dissector > > This means you should have 2 'entry point' functions to your dissector > (usually there's only one dissect_PROTO). > This way by writing different dissection/payload handling code in those two > functions you can react differently to > different calling protocols (tcp calls will trigger the first function, TDS > will trigger the second etc) > > > 2018-01-29 21:26 GMT+02:00 Uli Heilmeier <ze...@heilmeier.eu > <mailto:ze...@heilmeier.eu>>: > > Thanks a lot Roland. > > Now that I know what to look for packet-sip.c gives a nice example. > > Cheers > Uli > > Am 29.01.18 um 18:03 schrieb Roland Knall: > > Short answer: packet_info->layers should get you the list of protocols > called before yours. If you iterate, you should > > see the other protocols before yours. In packet.c:754 you see the code > adding to the list. > > > > Not sure though, how stable that interface is. It is pretty in-depth > for span, so you should be save to use it, but not > > sure, if it is official, or if there is another way. > > > > cheers > > Roland > > > > On Sun, Jan 28, 2018 at 10:59 PM, Uli Heilmeier <u...@heilmeier.eu > <mailto:u...@heilmeier.eu> <mailto:u...@heilmeier.eu > <mailto:u...@heilmeier.eu>>> wrote: > > > > Hi all, > > > > TL,DR: > > How does a dissector know which dissector called it? > > ___________________________________________________________________________ Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org> Archives: https://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev mailto:wireshark-dev-requ...@wireshark.org?subject=unsubscribe
