Sake, thanks for your reply, but your suggestion did not work, still got an empty captured packets list.
Regards, Cor Sake Blok schreef: > Cor, > > Most Wireless cards won't work in promiscuous mode under Windows. If you > untick the "Promiscuous mode" option in the capture setup screen, you will > probably see traffic. Please note that you will only see traffic to and from > your own laptop as well as broadcasts. > > Hope this helps, Cheers, > > > Sake > > ----- Original Message ----- > From: "C.E.E.Pernot" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, December 28, 2006 12:27 PM > Subject: [Wireshark-users] I see no captured packets at all > > > >> Hi, >> >> I installed Wireshark (Version 0.99.4 (SVN Rev 19757)) on my laptop >> (Acer Aspire 6510 with a build in Intel PRO/Wireless 3945ABG network >> card), running Windows XP sp2. >> My LAN has an Asus WL500g router and a 3COM switch for the wired >> desktops attached to it. >> >> When I start capturing on the laptop, the name of my networkcard is >> mentioned in the top of the capture window all right, but no captured >> packets are shown, even if I wait for 10 minutes. >> >> I also uninstalled and re-installed WinPcap (version 3.1) >> >> What am I doing wrong? Is this network card the evil part? >> On one of the wired desktops, it works fine. >> >> Any help is appreciated. >> >> Kind regards, >> Cor >> _______________________________________________ >> Wireshark-users mailing list >> [email protected] >> http://www.wireshark.org/mailman/listinfo/wireshark-users >> >> > > > _______________________________________________ > Wireshark-users mailing list > [email protected] > http://www.wireshark.org/mailman/listinfo/wireshark-users > _______________________________________________ Wireshark-users mailing list [email protected] http://www.wireshark.org/mailman/listinfo/wireshark-users
