Hi, The problem here is that you must capture the setup part where the tie to MMS OID is made. Best regards Anders
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kunjarteer Sent: den 17 april 2007 00:16 To: [email protected] Subject: Re: [Wireshark-users] Decoding MMS/COTP/TPKT/TCP Hi all, My apologies for the double post, I didn't realize my first email had gotten through. I've attached an example trace file, I'm using Wireshark version 0.99.5. Thank you, Kunjar On 4/16/07, Kunjarteer <[EMAIL PROTECTED]> wrote: Hi, I'm having problems getting MMS to decode properly when its transported over the COTP/TPKT/TCP protocol stack. The 'data' in the COTP payload is never decoded. I've tried using 'decode as' but MMS does not appear on the protocol list even thought it is enabled. MMS is decoded fine with other traffic I have which is over OSI presentation layers. Is there a way I can enable the dissectors to decode MMS when its sent directly over COTP? Thank you, Kunjar Singh
_______________________________________________ Wireshark-users mailing list [email protected] http://www.wireshark.org/mailman/listinfo/wireshark-users
