Thanks Jaap, What we do is like MAC-to-MAC decoding; at least the ethertype was helping us as now the packets are recognized as WiMAX. However, the system is telling us that the TLV are unknown!!
How it can look at TLV without identifying the MAC message first? I guess that we still have something wrong in our structure. We tried to generate the capture using text2cap function using MAC Messages with and without the header. Do we need to add or remove some info before processing with text2cap? Thanks again Ollivier Mont-Reynaud -----Original Message----- From: Jaap Keuter [mailto:[EMAIL PROTECTED] Sent: July 27, 2007 11:40 AM To: Community support list for Wireshark Subject: Re: [Wireshark-users] Use of WireShark to decode WiMAX MAC Messages Hi, Currently Wireshark can't do much other than MAC-to-MAC decoding. This is activated by packets with ethertype 0x08F0. There is a set of decoding functions available, but no dissector that binds them together. There is additional work in the pipeline, so keep an eye on this list and the developer list for things to come. Thanx, Jaap Ollivier Mont-Reynaud wrote: > Hi, > I would like to know if there is any exemple of captured packet to be > decoded by Wireshark. > > Actually, we cannot capture anything yet directly into Wireshark, but > we ascii files generated by some debug tools embedded into our WiMAX equipment. > > What is the format expected by WireShark to recognize that it is WiMAX > packets? > > Ollivier Mont-Reynaud > _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users