capture filter: host 65.98.143.227
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Fisher Sent: 2007-11-15 16:42 To: Community support list for Wireshark Subject: Re: [Wireshark-users] Capture filter not working? On Thu, Nov 15, 2007 at 03:26:06PM -0800, Trevor Tolk wrote: > When I use an IP (host) or tcp/udp capture filter on the monitoring > nic, it captures no traffic. When I use the same filter on the nic > connected to the normal network, the filter works fine. I can use an > ether capture filter an it works. What is (are) the capture filter(s) you are trying to use? It should be working fine without changing any options. Steve _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users