Hi Corey, > We only have two entries to start. We tried reloading the open > capture file using "view, reload" and we also closed and reloaded > Wireshark and then re-opened the capture file. Each time the > packets containing the IP address are still listed as the IP > address and not as "backbone_router".
I don't have Vista so I don't know if you've got the right directory. This can be checked by opening a cmd shell (does that still exist in Vista?) and type echo %APPDATA%. As far as I know you have to restart Wireshark if you change the "personal hosts" file. Anyway, the most likely reason you are not seeing the names is that name-resolution is default off. To turn it on you should go to Edit -> Preferences. Then select "Name resolution" on the left-hand side and put a checkmark after "enable network name resolution" option on the right. You'll have to close the capture file and reload it. Best regards, Jeroen Eeuwes _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users