This was fixed a while ago, it has been already delivered in either 0.99.8 or 0.99.9.
http://anonsvn.wireshark.org/viewvc/viewvc.cgi?view=rev&revision=24109 On 31-Mar-2008 14:45:06 ZE5B, Tapas Chatterjee <[EMAIL PROTECTED]> wrote: > > > Hi , > I am using wireshark 0.99.7. I have disabled all the protocols through the > Analyze->Enabled Protocols menu, > And only enabled a few protocols that I am monitoring e.g, Ethernet, IP, > UDP, RTP. > But there is a problem in the detailed dissection pane. > After dissecting the packet subtree correctly, one additional subtree is > shown at the end called "Data". This "Data" highlights the whole packet > bytes again. > > This problem is not there when all the protocols are enabled (default). > Is there any configuration that I am missing ? > > Please tell me how to overcome this. > > with regards, > Tapas Chatterjee > > > > *********************** Aricent-Unclassified *********************** > > "DISCLAIMER: This message is proprietary to Aricent and is intended solely > for the use of > the individual to whom it is addressed. It may contain privileged or > confidential information and should not be > circulated or used for any purpose other than for what it is intended. If > you have received this message in error, > please notify the originator immediately. If you are not the intended > recipient, you are notified that you are strictly > prohibited from using, copying, altering, or disclosing the contents of > this message. Aricent accepts no responsibility for > loss or damage arising from the use of the information transmitted by this > email including damage from virus." > > _______________________________________________ > Wireshark-users mailing list > Wireshark-users@wireshark.org > http://www.wireshark.org/mailman/listinfo/wireshark-users > > -- This information is top security. When you have read it, destroy yourself. -- Marshall McLuhan _______________________________________________ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users