Hey, Win
> The problem is probably the inclusion of windows.h somewhere, that
> defines macros min, max, and other mishap. But normally, that should
> not happen while you are building Wt. Since it happens to you anyway,
> you can define NOMINMAX to mitigate the problem (add a line
> ADD_DEFINITIONS(-DNOMINMAX) in the toplevel CMakeLists.txt).
> As I said, this should not happen, so I'm curious what causes it. What
> version of boost are you using?
I will try it.
My boost version is 1.35, you thought it caused by boost the lower
version?
---
B.R.
Jiongliang
> Best regards,
> Wim.
> 2010/3/9 <[email protected]>:
>
> Hi,
>
> When I build wt-2.99.2 in MS VS2005, then everything is fine.
> But when I build wt-3.1.1b in MS VS2005, much error happen.
>
> The first step: cmake is fine, and generate VS solution is ok too,
> when I run the WT.sln, then press F, errors happen:
>
> 2>..\..\..\..\src\Wt\Ext\TableView.C(154) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(154) : error C2059: syntax error :
'::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(154) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(154) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(155) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(155) : error C2059: syntax error :
'::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(155) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>..\..\..\..\src\Wt\Ext\TableView.C(155) : error C2589: '(' : illegal
token
> on right side of '::'
> 2>Build log was saved at
> "
file://g:\wt-web\wt-3.1.1b\build\src\Wt\Ext\wtext.dir\Debug\BuildLog.htm"
> 2>wtext - 8 error(s), 4 warning(s)
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(703) : error C2589: '(' :
illegal
> token on right side of '::'
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(703) : error C2059: syntax error
:
> '::'
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(705) : error C2589: '(' :
illegal
> token on right side of '::'
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(710) : error C2589: '(' :
illegal
> token on right side of '::'
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(710) : error C2059: syntax error
:
> '::'
> 1>..\..\src\Wt\Chart\WChart2DRenderer.C(712) : error C2589: '(' :
illegal
> token on right side of '::'
>
> 1>..\..\src\Wt\Chart\WAxis.C(79) : error C2589: '(' : illegal token on
right
> side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(79) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(80) : error C2589: '(' : illegal token on
right
> side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(80) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(165) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(165) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(184) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(184) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(345) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(345) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(416) : warning C4003: not enough actual
> parameters for macro 'max'
> 1>..\..\src\Wt\Chart\WAxis.C(416) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(416) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(417) : warning C4003: not enough actual
> parameters for macro 'min'
> 1>..\..\src\Wt\Chart\WAxis.C(417) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(417) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(432) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(432) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(434) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(434) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(445) : warning C4003: not enough actual
> parameters for macro 'max'
> 1>..\..\src\Wt\Chart\WAxis.C(445) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(445) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(448) : error C2181: illegal else without
> matching if
> 1>..\..\src\Wt\Chart\WAxis.C(451) : warning C4003: not enough actual
> parameters for macro 'max'
> 1>..\..\src\Wt\Chart\WAxis.C(451) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(451) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(454) : error C2181: illegal else without
> matching if
> 1>..\..\src\Wt\Chart\WAxis.C(459) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(459) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(463) : error C2589: '(' : illegal token on
> right side of '::'
> 1>..\..\src\Wt\Chart\WAxis.C(463) : error C2059: syntax error : '::'
> 1>..\..\src\Wt\Chart\WAxis.C(494) : fatal error C1903: unable to recover
> from previous error(s); stopping compilation
> 1>WTreeView.C
>
> and so on...
>
> ========== Build: 2 succeeded, 23 failed, 5 up-to-date, 2 skipped
==========
>
> I don't know what's the matter with it, can anybody tell me why?
>
> PS: All install steps are follow Redmine wt about Installation Wt on ms
> windows.
>------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
witty-interest mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/witty-interest
