I think you need "do_install" to come after InstallFiles, otherwise the file won't be installed. Also, didn't look close before, but you need your CustomAction to be deferred so that it happens during the script execution phase instead of the script generation phase.
-----Original Message----- From: Henning Eiben [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 29, 2008 10:05 To: Rob Mensching; wix-users@lists.sourceforge.net Subject: RE: Using CustomAction Well, this is my install-sequence: <InstallExecuteSequence> <AppSearch Suppress="yes"/> <Custom Action="do_install" Before="do_deploy"/> <Custom Action="do_deploy" After="InstallFiles">NOT Installed AND NOT REMOVE</Custom> <Custom Action="do_update" After="InstallFiles">Installed AND NOT REMOVE</Custom> <Custom Action="do_delete" After="InstallFiles">Installed AND REMOVE</Custom> </InstallExecuteSequence> Hmm, if it's actually that hard to do, I'll probably stick with installing my files to some "dummy"-location - even though it will never be used except while registration ... > -----Original Message----- > From: Rob Mensching [mailto:[EMAIL PROTECTED] > Sent: Tuesday, April 29, 2008 7:00 PM > To: Henning Eiben; wix-users@lists.sourceforge.net > Subject: RE: Using CustomAction > > When are you executing the CustomAction? > > PS: if you don't want to install the file, then you'll need to either > write a block of code to temporarily extract it to disk (lots of work > to get that right in all cases securly) or try to find it on source > media (lots of problems if the source media isn't available). > Installing the file is probably easier as long as having it on disk > isn't a problem and it isn't *too* big. <smile/> > > -----Original Message----- > From: Henning Eiben [mailto:[EMAIL PROTECTED] > Sent: Tuesday, April 29, 2008 01:56 > To: Rob Mensching; wix-users@lists.sourceforge.net > Subject: RE: Using CustomAction > > Thanx for the hint, but somehow that doesn't quite work as expected ... > maybe I should post some of my wix-code ... maybe I'm doing some stupid > wrong ... > > > --- cut --- cut--- cut--- cut --- > <Directory Id="TARGETDIR" Name="SourceDir"> > <Component Id="myca" Guid="{31F124C9-9DA8-41d9-AF4D-E4E59CB8600B}" > > <File Id="wsp2" Source="..\Deployment\WebPartAppTest.wsp"/> > </Component> > </Directory> > > <CustomAction Id="do_install" FileKey="wsp2" > ExeCommand="[stsadm] -o addsolution -filename [!wsp2]" > Return="check" /> > --- cut --- cut--- cut--- cut --- > > > I don't want to "install" the wsp-file somewhere on my machine ... > which is why I didn't specified any target-directory. > > > -----Original Message----- > > From: Rob Mensching [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, April 29, 2008 10:44 AM > > To: Henning Eiben; wix-users@lists.sourceforge.net > > Subject: RE: Using CustomAction > > > > The Formatted topic in the MSI SDK describes the magical syntax to > get > > you the full path to your file: "[!FileId]". Lots of other good > stuff > > in that particular help topic. > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:wix-users- > > [EMAIL PROTECTED] On Behalf Of Henning Eiben > > Sent: Monday, April 28, 2008 06:29 > > To: wix-users@lists.sourceforge.net > > Subject: [WiX-users] Using CustomAction > > > > Hi List, > > > > I created a rather simple wix-project to create a MSI installer for > my > > project. I wrote a simple webpart for sharepoint (which actually > > doesn't really matter at this point ...), which I would like to > > register using 'stsadm'. OK, so I put my webpart (packaged as a WSP- > > file) as a binary in my installer. Next I would like to issue a > command > > like 'stsadm -o addsolution -filename mywebpart.wsp', where > > 'mywebpart.wsp' is the name of the binary. > > > > But how would I do something like this? I didn't find any clue, on > how > > to pass a binary as an argument to a custom action. > > > > So I create a custom action like <customaction id=foo > execomand="stsadm > > -o addsolution -filename mywebpart.wsp"/> but who would a temporary > > find my extracted binary, since I would have to provide an according > > path? > > > > -- > > > > Mit freundlichem Gruß > > > > Henning Eiben > > > > busitec GmbH > > Consultant > > > > e-mail: [EMAIL PROTECTED] > > > > > > +49 (251) 13335-0 Tel > > +49 (251) 13335-35 Fax > > > > Rudolf-Diesel-Straße 59 > > 48157 Münster > > www.busitec.de > > > > Sitz der Gesellschaft: Münster > > HR B 55 75 - Amtsgericht Münster > > USt-IdNr. DE 204607833 - St.Nr. 336/5704/1277 > > Geschäftsführer: Simon Böwer, Henning Eiben, Stefan Kühn, Martin > > Saalmann > > > > > > > > --------------------------------------------------------------------- > -- > > -- > > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > > Don't miss this year's exciting event. There's still time to save > $100. > > Use priority code J8TL2D2. > > > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/ > > javaone > > _______________________________________________ > > WiX-users mailing list > > WiX-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wix-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
