Hi Phil,
I just made another try: I removed the bootload custom action from the code. And this time, it works. By saying works, I mean, I had the old version app running, installing the new version. I did see FilesInUse dialog, and I manually shut down the app. The installation process kept going.. until it was finished. Things worked fine. So it seems the problem links with this bootload custom action. But why FilesInUse links with a custom action? I don't get it. By the way, here is my code(post it again): <UI> <DialogRef Id="FilesInUse" /> ... </UI> ... <CustomAction Id="ExecBootloader_Cmd" FileKey="MainApp" ExeCommand="-bootload" Execute="deferred" Return="ignore" HideTarget="no" Impersonate="no" /> <InstallExecuteSequence> <Custom Action="ExecBootloader_Cmd" Before="InstallFinalize" /> </InstallExecuteSequence> >From here: >http://blogs.technet.com/alexshev/archive/2008/02/21/from-msi-to-wix-part-5-custom-actions.aspx > There are some info: * If the source file is not already installed on the computer: * Deferred custom actions of this type must be sequenced after the InstallFiles action. * Non-deferred custom actions of this type must be sequenced after the InstallFinalize action. Is it possible that the deferred/non-deferred things is wrong in my code? Is it allowed if we run a custom action which uses the main application with command line arguments? Is it possible for us to keep FilesInUse, and also keep our bootload custom action? How to resolve it? FilesInUse and custom action, I still don't understand why these irrelevant things could conflict each other and cause error 2753. Thanks. ________________________________ From: little.forest <little.for...@ymail.com> To: General discussion for Windows Installer XML toolset. <wix-users@lists.sourceforge.net> Sent: Friday, October 2, 2009 4:01:35 PM Subject: Re: [WiX-users] How to add FilesInUse support Thanks Phil! I really appreciate your reply and your time. "If MainApp running and FilesInUse does not shut it down, then it cannot be replaced on the system, so it can't be run." - Correct. This is why we need to put this FilesInUse in. Here are what I experienced: - the old version running - start running the new version installer - a few seconds, the FilesInUse dialog showed up - I manually exit the old version of application - the new version installation process kept going.. a few seconds, the build failed Error 2753 - go to the "Program Files" folder, the application folder wasn't even created. "Is it doing something that requires it to be a custom action actually being installed onto the system? I'm thinking it can be in the Binary table, depending on why it's being run." - Our application is a .NET 3.5 WPF based application. The application is written in C#. There is a perform issue. Every time when the application startup, it'll take a fair mount of time to start. So the development team came up with an idea. The idea is, right after the installation and before the end user launching the application, start the "bootloader" by using the main application with a command line argument(something like "mainapp.exe -bootload"). Note: the main application name is mainapp.exe. If we "real" run the application, the same mainapp.exe will be executed. What this "-bootload" does is that it will start some services, load some DLL files etc. I'm not sure whether this design is good or not. But it does work fine. When the end user launch the application, she will feel the application is fast - because services and DLLs already loaded. So we need this custom action to start this bootloader in installer. Actually, you know, this bootloader is the same as the main application, but just with an argument. Will this cause problem? But why there is no any files installed? The application folder not even created? I did schedule this custom action before "InstallFinalize" which is almost the end of the installation. I use custom action type 18 because the executable(actually it's the main application) is installed with the application, and I need to set the command line argument. Is this the problem? So one thing worth noticing, if there is no old version running, everything is fine. I'm really puzzled. Thanks again, Phil. /Brian ________________________________ From: "Wilson, Phil" <phil.wil...@wonderware.com> To: General discussion for Windows Installer XML toolset. <wix-users@lists.sourceforge.net> Sent: Friday, October 2, 2009 3:07:36 PM Subject: Re: [WiX-users] How to add FilesInUse support If MainApp running and FilesInUse does not shut it down, then it cannot be replaced on the system, so it can't be run. Is it doing something that requires it to be a custom action actually being installed onto the system? I'm thinking it can be in the Binary table, depending on why it's being run. Phil Wilson -----Original Message----- From: little.forest [mailto:little.for...@ymail.com] Sent: Friday, October 02, 2009 2:43 PM To: General discussion for Windows Installer XML toolset. Subject: Re: [WiX-users] How to add FilesInUse support Hi Phil, Thanks for you reply. It's good to know that "2753 is nothing directly related to FilesInUse". For "It's typically caused by running a custom action referring to a program that is not going to be installed. So it looks like you're asking to run MainApp but the one in your setup isn't being installed." - It's true. We do have a custom action like this(Does this code look okay?): <CustomAction Id="ExecBootloader_Cmd" FileKey="MainApp" ExeCommand="-bootload" Execute="deferred" Return="ignore" HideTarget="no" Impersonate="no" /> <InstallExecuteSequence> <Custom Action="ExecBootloader_Cmd" Before="InstallFinalize" /> </InstallExecuteSequence> As long as the old version wasn't running, the major upgrade worked fine. I mean, there wasn't error, the old version was removed, and the new version was installed. The custom action run okay as well. But, if the old version was running, we did see something different: we see the FilesInUse dialog, we shutdown the old version manually, so far so good, we kept it going.. then it failed. I noticed the application folder under "Program Files" was not even created. Netherless to say, anything new version wasn't installed. So when the custom action was triggered, the program can't be found, then error. So in here, it seems to me that the only difference is whether "the old version is running" and further "FilesInUse". So for "This can because there's a component or feature state that means it's not being installed, or yours isn't being installed because there's already one on the system with a higher version." - I doubt if it's about the version higher/lower. Because if this is true, then we couldn't explain why the new version was installed and run okay while the old version wasn't running. It's suppposed to fail even the old version wasn't running, right? Again, the only difference is the "old version running". If not running, no FilesInUse showing up, things are okay. If running, the FilesInUse part behave correctly but nothing will be installed. So I guess this is about FilesInUse. But, really, I don't know the reason and the solution. By the way, we use WiX version 3.0.4805.0. If you have any idea, please let me know. Thanks a lot. /Brian ________________________________ From: "Wilson, Phil" <phil.wil...@wonderware.com> To: General discussion for Windows Installer XML toolset. <wix-users@lists.sourceforge.net> Sent: Friday, October 2, 2009 1:57:16 PM Subject: Re: [WiX-users] How to add FilesInUse support 2753 is nothing directly related to FilesInUse - look up the Windows SDK Windows Installer errors for this kind of thing. It's typically caused by running a custom action referring to a program that is not going to be installed. So it looks like you're asking to run MainApp but the one in your setup isn't being installed. This can because there's a component or feature state that means it's not being installed, or yours isn't being installed because there's already one on the system with a higher version. Phil Wilson -----Original Message----- From: little.forest [mailto:little.for...@ymail.com] Sent: Friday, October 02, 2009 12:07 PM To: General discussion for Windows Installer XML toolset. Subject: Re: [WiX-users] How to add FilesInUse support Let me correct something a bit: If not add "<DialogRef Id="FilesInUse" />" line, the installation is okay but it won't detect and show "FilesInUse" dialog. If add "<DialogRef Id="FilesInUse" />" line in code, the installation is okay if this is a fresh intallation(fresh means no previous version installed). If add "<DialogRef Id="FilesInUse" />" line in code, and there is the old version application running, then the installation of the new version will detect and show the "FilesInUse" dialog which is good. But later on the installation of the new version will be failed because of an Error called 2753. Why this happens? How to resolve it? Thanks. ________________________________ From: little.forest <little.for...@ymail.com> To: wix-users@lists.sourceforge.net Sent: Friday, October 2, 2009 11:17:01 AM Subject: [WiX-users] How to add FilesInUse support We use WiX 3.0. We have a problem: the end user is running the old version of the application, but she tries to install the new version at the same time. As we use major upgrade, the old version will be uninstalled first. So in this case, if the old version is running, we can't install the new version properly. I knew "util:CloseApplication". So I tried that. But in our application, there is a requirement "close application will just minimize the GUI to system tray just like Yahoo Messenger". I'm not sure if "util:CloseApplication" does send WM_CLOSE message to our application. But even if it does, our application will just minimize itself to system tray but not close itself. We already tested it. The application didn't shut down. So we can't use this "util:CloseApplication". Then I tried another solution: http://n2.nabble.com/Custom-action-sequencing-problem-td709311.html#a709311 Well, it partly worked. If we keep the old version running, then the process is killed when installing the new version. However, just a few seconds later, the installation failed because of "Error code 2753". I realized the old version was uninstalled, the new version wasn't installed. Also, I was thinking killing a process directly might not be a good thing. So I kept searching other solutions. Then I found someone said "FilesInUse". I think this solution even works for us. So I added this line: <UI> <DialogRef Id="FilesInUse" /> ... </UI> Now we have new problem "Error code 2753". I tried two cases: Case 1: I kept the old version running, and I installed the new version. During installation, the "FilesInUse" dialog did show up - I was very happy. Then I exited the old version. The installation kept going.. just a few seconds, it failed. I noticed the old version was uninstalled, but the new version wasn't installed. Here is the log: MSI (s) (48:4C) [10:15:34:839]: Note: 1: 2753 2: MainApp MSI (s) (48:4C) [10:15:34:839]: Note: 1: 2205 2: 3: Error MSI (s) (48:4C) [10:15:34:839]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 2753 DEBUG: Error 2753: The File 'MainApp' is not marked for installation. The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2753. The arguments are: MainApp, , MSI (s) (48:4C) [10:15:44:245]: Note: 1: 2205 2: 3: Error MSI (s) (48:4C) [10:15:44:245]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709 MSI (s) (48:4C) [10:15:44:245]: Product: BigAppleProduct -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2753. The arguments are: MainApp, , The log says error, but what the error means? What caused this error? The log didn't say. Case 2: do a fresh installation. There is no "FilesInUse" dialog showing up, of course. But the install still failed - Error 2753. This doesn't make any sense. It seems the problem is this new added line "<DialogRef Id="FilesInUse" />". By adding this line, the error 2753 is introduced. Why is that? So how can I add this FilesInUse support in WiX 3? Where I did wrong here? Many many thanks. /Brian __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users __________________________________________________________________ The new Internet Explorer(r) 8 - Faster, safer, easier. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users __________________________________________________________________ Looking for the perfect gift? Give the gift of Flickr! http://www.flickr.com/gift/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users __________________________________________________________________ The new Internet Explorer® 8 - Faster, safer, easier. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry® Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9-12, 2009. Register now! http://p.sf.net/sfu/devconf _______________________________________________ WiX-users mailing list WiX-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wix-users
