The sites you are connecting to most likely required 128-bit SSL, which is not supported in the trial version of the client. You will need to go back to 7.6.2 or license the full version of the most recent client.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jordan, Beth A Sent: Wednesday, April 21, 2004 8:53 AM To: '[EMAIL PROTECTED]' Subject: [WS_FTP Forum] Coverting from WS FTP Pro 7.61 to 8.03 In WS FTP Pro 7.6, I am connecting to a site using server type "FTP", with passive mode and SSL checked. When I upgraded to use the 30-day trial of version 8.03, the sites I had set up were carried over, but I can no longer connect to them. I tried changing to all the possible combinations of server type, certificate and SSL, but I can't find a combination that works. (Here's what was carried over from 7.61 to 8.03: server type of FTP/SSL (AUTH SSL), use passive mode is checked, client certificate is none, and none of the SSL options are checked.) Here are the error messages that are displayed when I try to use a site that was carried over from 7.61 to 8.03: SSL Connect error 2: Connect Failed. SSL Connect Failed Any assistance you can provide is appreciated. Thanks! Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/wsftp_forum%40list.ipswitch.com/ http://www.realmed.com/legal/confidential.htm Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/wsftp_forum%40list.ipswitch.com/
