Hi Bill...
Thanks for the ideas. I'm off to vacation for a week and will not have access
to the desktop or radio for that time. I will try your debugging build next
weekend.
The input level is reported and control with pulse audio volume control or the
pull down audio control on the top bar. I'm watching the slider position for
Input Audio and stepping the code. one more click on "step into" causes the
input level go from about 20% to 100%.
jeff, wa1hco
On 08/01/2014 05:10 AM, Bill Somerville wrote:
On 01/08/2014 04:42, jeff millar wrote:
Hi Jeff,
Sorry you are having some issues with the current WSJT-X code.
First problem: Most of the time, when starting a transmission or using the
Tune button, WSJTX throws a "Rig Control Error Hamlib error: Invalid
parameter while getting current VFO frequency". This occurs about 1 sec
after starting a transmission. But sometimes it runs ok for a while without
throwing errors. The Test CAT button doesn't show a problem. I can browse
the bands with the band select button without seeing the problem.
So I can see what is going on here can you build a version that has CAT
diagnostics enabled. Details of a way to do that are in this posting:
https://sourceforge.net/p/wsjt/mailman/message/32650244/
Once built; run the application to reproduce the issues then close it. The
file wsjtx_trace.log is created in the directory that the binary was in.
Compress and send me that file (directly is probably best) and I'll have a
look at what is going on.
Second problem: Whenever WSJTX starts up it somehow resets the input level to
100%. I traced this down to this line in mainwindow.cpp
Q_EMIT initializeAudioOutputStream (m_config.audio_output_device (),
AudioDevice::Mono == m_config.audio_output_channel () ? 1 : 2,
m_msAudioOutputBuffered);
any ideas?
That line is the initialisation of the audio output stream, that has to be
done before it can be used. That should only effect TX audio so I am
surprised that it is having any impact on RX audio. Unfortunately I only have
Linux on a VM and the audio drivers for the VM do not support input audio so I
cannot debug this issue here.
When you say "resets input level to 100%" where are you seeing that?
jeff, wa1hco
I'm running WSJTX, r1.4, r4224 on Ubuntu 14.04. Hamlib is V3.0. IC-746PRO.
PTT method by RTS.
Application output from qtcreator...
ig_set_conf: serial_handshake='None'
rig_set_conf: ptt_pathname='/dev/ttyUSB1'
rig_set_conf: ptt_type='RTS'
rig:rig_open called
read_string(): Timed out 0.200237 seconds without reading a character.
read_string(): Timed out 0.200235 seconds without reading a character.
read_string(): Timed out 0.200244 seconds without reading a character.
read_string(): Timed out 0.200218 seconds without reading a character.
rig:rig_close called
rig:rig_close called
rig:rig_cleanup called
QDialog::exec: Recursive call detected
Got a buffer underflow!
Got a buffer underflow!
Got a buffer underflow!
Got a buffer underflow!
The only issue I see with that output is the read_string() time outs which
implies that the CAT module is not getting any response from the rig from a
command sent to it at some point, the diagnostic trace should help with that too.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
