You got two sets of buttons (regular and radio) on Tab 2???
I'm running r4333 and don't see two sets.
I'd recommend very similar wording as the Tab 1 buttons but perhaps add the
message type.
e.g. "Switch to CQ message NOW"
Maintaining some consistency that way.
Mike W9MDB
From: Bill Somerville [mailto:[email protected]]
Sent: Tuesday, September 23, 2014 11:38 AM
To: [email protected]
Subject: Re: [wsjt-devel] [HamApps] Re:: Request
On 23/09/2014 17:26, Michael Black wrote:
Hi Mike,
I'm posting to the wstj list to get this off of hamapps. I've heard some
get annoyed at non-hamapps threads.
Well the request could be fulfilled by JTMacros although I doubt Laurie
would consider it of high priority.
Here is a link to the OP as you have only posted my reply to the OP and have
lost the context.
https://au.groups.yahoo.com/neo/groups/HamApps/conversations/messages/6517
Good to know about tab 2..I don't use tab 2. I was confused with "radio
buttons" since tab 2 doesn't have any.just "buttons".
Err, it does on my screen. There is a group of two radio buttons to select
standard generated or user defined free text message.
But should the hover text then say "NOW" like tab 1 says for the buttons to
maintain consistency? It's not intuitive.
All the buttons in the messages window on Tab 2 have immediate effect in
transmit mode. It may be sensible to make the tool tips explicitly state
that fact, although it is fairly obvious since the outgoing message in the
status bar is updated.
Any suggestions for wordings for each of the buttons?
Mike W9MDB
73
Bill
G4WJS.
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, September 23, 2014 11:18 AM
To: [email protected]
Subject: Re:: RE: [HamApps] Re:: Request
Hi Mike,
that is correct for the "Tab 1" messages but not the "Tab 2" messages which
are the ones I suspect most operators use.
Laurie could choose to "click" the radio button if "Tab 1" were active and
JTMacros writes the free text field "Tx 5". Alternatively WSJT-X could do
that on any modification to the free text edit.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
