On 02/10/2014 09:37, Andy Nunn wrote: Hi Andy, > I don't know exactly where to send this so I am using the dev email > address. I just down loaded and tried to use this rc to no avail. Sorry you are having issues with WSJT-X v1.4. > > Presently I am using WSJT-X v1.3, r3673. and it is working perfectly > with the latest version of JT-Alerts. I use WSJT-X with DXLabs > Commander. The configuration is Cat control for frequency tracking and > Com4 DTR PTT for activating the transmitter. Commander is on Com port > 3. These are virtual ports provided by Yaesu FTdx-3000 driver software. > I am using a Signalink for the sound card rather than the internal sound > card of the FTdx-3000. This because I also use FLDigi and it will not > work with the internal sound card. Which program is connected to COM4 and toggling the DTR pin for PTT?
When you say "Commander is on Com port 3", what exactly do you mean by that? > > Signal decoding is taking place and frequency changes can be done from > WSJT-X but the software will not activate the transmitter. All the > relevant settings that work for v1.3 are applied to this rc but no joy. > > Any suggestions. > > Andy Nunn - AJ0Z 73 Bill G4WJS. ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
