Hi all,
I noticed that during the transmission can change the message
Try the following:
- put the power to zero and connect to dummy load to prevent disturbance
- doubleclick on a previous decoded message
- wait TX cycle start (enable TX is red)
- try several possible TX messages with PTT active
In file ALL.TXT (real callsign was replaced by ZZZZZZ and YYYYYY) I can
see:
...........
0850 -21 0.1 1386 # YYYYYY ZZZZZZ 73
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB JN65
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB -21
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB R-21
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB RRR
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB 73
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB -21
0851 Transmitting 28.076 MHz JT65: CQ IW3RAB JN65
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB -21
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB R-21
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB JN65
0851 Transmitting 28.076 MHz JT65: ZZZZZZ IW3RAB 73
.............
All TX are in the some 0851 minute, but I do not know what has been
transmitted.
this behavior is wanted?
Thank in advance
73
Sandro
IW3RAB
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel