On 09/10/2014 19:37, Joe Taylor wrote: > Hi Jim, > > I am copying this brief reply to the wsjt-devel list, where I'm sure one > of our group familiar with the K3 can get you straightened out. > > -- Joe, K1JT > > > On 10/9/2014 1:58 PM, James Denneny wrote: >> Hi Joe Hi Jim,
Sorry you are having some issues with the WSJT-X v1.4.0-rc2 Beta release. >> >> I am a new WSJT user and am having a setup issue. I am running WSJT in "DXL >> Commander" server setting. RX looks ok - waterfall, stations heard, etc. >> My big issue is PTT. I cannot get K3 to switch from RX to TX using PTT. >> When I key the PTT button under WSJT settings, my K3 data mode is switching >> from DATA A to USB. WSJT PTT Setting is DTR and Com6 >> >> I have Microham MK2 router in the mix with a preset for WSJT. There is a >> port assignment labeled FSK/PTT with a check box to enable PTT. I have set >> the port to COM6 and checked the PTT box. With no FSK software running, >> COM6 should be strictly PTT when keyed by WSJT PTT. Microham cable connects >> the PTT line to the K3 PTT port. Pretty straightforward. The Microham >> Router works ok in CW, FSK, SSB. >> >> Any idea what my issue could be? I key PTT in WSJT and the TX led on the K3 >> does not come on and data mode changes. We are aware of some issues using DX LabSuite Commander as an intermediary to a K3, I am working with Dave AA6YQ to try and resolve these before we make another release candidate of v1.4. I haven't fully investigated the issue with the K3 specifically as it effects a number of rigs with "Kenwood like CAT protocols". All I can offer at this moment is to set "Mode" to "None" in "Settings->Radio", this will stop WSJT-X trying to set the rig mode and simplifies the CAT exchange considerably. Obviously you will have to set the rig mode appropriately before using WSJT-X. I am not sure if this will help but it is worth trying, let me know how it goes please. I will update you when we have more information or a fix. >> >> Thanks >> >> Jim Denneny >> K7EG 73 Bill G4WJS. ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
