Hi Matthias, a quick answer is that you need to install OmniRig on the development machine because a tool runs in the build to generate the interface to OmniRig from the registered OmniRig server. Both the recommended CMake build and the old and obsolete qmake project should do this generation once the OmniRig server is installed.
Hope to see you on the wsjt-devel list. 73 Bill G4WJS. On 17/10/2014 19:20, Joe Taylor wrote: > Hi Matthias, > > You are correct that Omnirig.h is included not in the tarfile. It is > created during the build procedure using CMake. > > If you need help in building WSJT-X, you might want to join the > wsjt-devel email list. > > -- 73, Joe, K1JT > > On 10/17/2014 1:58 PM, Matthias Buchwald wrote: >> Hallo Joe, >> I think in 'wsjtx-1.4.0-rc2-Source.tar.gz' is a error. In >> 'OmnirigTransceiver.hpp' is calling the 'Omnirig.h'-file but is nowhere >> in the projekt. >> >> Sorry for my bad english -> 73 de Matthias, DL3VCO > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
